Construction complete · Mar 2026✅Inspection Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS FAB1 CuSO4 Tank Replacement

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS FAB1 CuSO4 Tank Replacement is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2026). The project has an estimated value of $280K across about 1,215 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2026003000

$280K

Project Value

1,215

Square Feet

$230/sqft

Cost/SqFt

2 months

Duration

Registered:Oct 9, 2025

Start:Oct 20, 2025

Target:Dec 20, 2025

✅

Inspection Complete

Final inspection completed, awaiting project closure

SAS FAB1 CuSO4 Tank Replacement is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $280K covering 1,215 sq ft. SAMSUNG AUSTIN SEMICONDUCTOR is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on October 9, 2025.

❓Frequently Asked Questions

What is SAS FAB1 CuSO4 Tank Replacement?

SAS FAB1 CuSO4 Tank Replacement is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation for a new CuSO4 tank within the FAB1 CRS Room. The new tank will be installed on top of existing containment trench grating.

Is SAS FAB1 CuSO4 Tank Replacement open in Austin?

Construction on SAS FAB1 CuSO4 Tank Replacement is complete — TDLR records show the project passed its required accessibility inspection in Mar 2026. The building is finished and very likely open.

Where is SAS FAB1 CuSO4 Tank Replacement located?

SAS FAB1 CuSO4 Tank Replacement is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS FAB1 CuSO4 Tank Replacement?

SAMSUNG AUSTIN SEMICONDUCTOR is the property owner/developer of record for SAS FAB1 CuSO4 Tank Replacement, per its TDLR project registration.

Who is the architect or design firm for SAS FAB1 CuSO4 Tank Replacement?

Fuse Architecture Studio is the design firm of record for SAS FAB1 CuSO4 Tank Replacement, according to its TDLR filing.

How much does SAS FAB1 CuSO4 Tank Replacement cost and how big is it?

SAS FAB1 CuSO4 Tank Replacement has an estimated construction value of $280K and approximately 1,215 square feet (about $230/sqft), based on its TDLR filing.

📋Scope of Work

Installation for a new CuSO4 tank within the FAB1 CRS Room. The new tank will be installed on top of existing containment trench grating.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.