Opening ~Aug 2026📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS GCS Capa Up Demo F226-SG01

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS GCS Capa Up Demo F226-SG01 is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Aug 2026. The project has an estimated value of $400K across about 13,621 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026012573

$400K

Project Value

13,621

Square Feet

$29/sqft

Cost/SqFt

6 months

Duration

Registered:Feb 13, 2026

Start:Feb 23, 2026

Target:Aug 31, 2026

Remaining:41 days

📝

Review Complete

Design review complete, construction may proceed

SAS GCS Capa Up Demo F226-SG01 is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $400K covering 13,621 sq ft. SAMSUNG AUSTIN SEMICONDUCTOR is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on February 13, 2026.

❓Frequently Asked Questions

What is SAS GCS Capa Up Demo F226-SG01?

SAS GCS Capa Up Demo F226-SG01 is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Demolition of idle GCS equipment's *DTLRs), 10 offline TEOS DTLRs, located F2M1 CSF Col.F20.

Is SAS GCS Capa Up Demo F226-SG01 open in Austin?

SAS GCS Capa Up Demo F226-SG01 is still under construction in Austin, TX, with an estimated completion of Aug 2026 according to its TDLR registration.

Where is SAS GCS Capa Up Demo F226-SG01 located?

SAS GCS Capa Up Demo F226-SG01 is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS GCS Capa Up Demo F226-SG01?

SAMSUNG AUSTIN SEMICONDUCTOR is the property owner/developer of record for SAS GCS Capa Up Demo F226-SG01, per its TDLR project registration.

Who is the architect or design firm for SAS GCS Capa Up Demo F226-SG01?

Fuse Architecture Studio is the design firm of record for SAS GCS Capa Up Demo F226-SG01, according to its TDLR filing.

How much does SAS GCS Capa Up Demo F226-SG01 cost and how big is it?

SAS GCS Capa Up Demo F226-SG01 has an estimated construction value of $400K and approximately 13,621 square feet (about $29/sqft), based on its TDLR filing.

📋Scope of Work

Demolition of idle GCS equipment's *DTLRs), 10 offline TEOS DTLRs, located F2M1 CSF Col.F20.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.