Funding type
This project is privately funded, on private land for private use.
SAS FAB1 Heat Gen Capacity Increase, Phase 3 in Austin, TX
12100 Samsung Blvd, Austin, TX, 78754
SAS FAB1 Heat Gen Capacity Increase, Phase 3 is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Aug 2027. The project has an estimated value of $1.7M across about 20,000 sq ft.
- Estimated project value
- $1.7M
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 20,000 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $83/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 8 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
61 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
251 days after the preceding date shown.
Source: TDLR filing
View source record
📰About SAS FAB1 Heat Gen Capacity Increase, Phase 3
Samsung Austin Semiconductor is executing a $1,651,000 renovation at its Austin facility, specifically targeting the replacement of heat generation equipment in the FAB1 building. The project, filed under the name SAS FAB1 Heat Gen Capacity Increase, Phase 3, involves the demolition and replacement of heat gen fan H, its associated damper, and ductwork. This work occupies a 20,000 sq ft area within the structure located at 12100 Samsung Blvd, Austin, TX 78754.
Project Scope and Financials
The estimated cost of $1,651,000 translates to $83 per square foot. This figure is below the Travis County median of $104 per square foot for similar renovation and alteration filings. The total valuation is above the county median of $300,000 for this project type, placing it in the top quarter of costs. The scheduled build window of 251 days is longer than the county median of 98 days for comparable work.
Construction is slated to begin in December 2026. The project was registered with TDLR in October 2026, and plan review is pending. Completion is targeted for August 2027. The project is privately funded on private land for private use.
Design and Ownership
Samsung is the owner and developer of record for this facility. Fuse Architecture Studio serves as the design firm of record. Mark S Robinson is the registered accessibility specialist associated with the filing. Samsung has six other TDLR-registered projects in the area, totaling $5,841,700, all with review complete. Fuse Architecture Studio has six other registered projects totaling $5,090,000, including work for Applied Materials and other Samsung facilities.
City of Austin permit records show at least 25 permits on file at this street address. The 25 most recent were issued between September 2024 and September 2026. These include electrical, building, plumbing, and mechanical permits with a total declared valuation of $9,981,475. Recent permit descriptions reference interior remodels of existing light manufacturing facilities and the replacement of steam-to-hot-water heat exchanger skid systems. The area profile for ZIP code 78754 indicates a population of about 31,410 and a median household income of $92,964, according to U.S. Census ACS 2023 five-year estimates.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78754 (Austin)
One email per change. Unsubscribe in one click. Privacy.
SAS FAB1 Heat Gen Capacity Increase, Phase 3 is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $1.7M covering 20,000 sq ft. Samsung is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on October 22, 2026.
Frequently Asked Questions
What is the specific scope of work for this project?
The scope involves the demolition and replacement of heat gen fan H, its damper, and associated ductwork within the FAB1 building.
Who is the design firm for this renovation?
Fuse Architecture Studio is the design firm of record for this project.
What is the estimated cost per square foot?
The estimated cost is $83 per square foot, which is below the Travis County median of $104.
What is SAS FAB1 Heat Gen Capacity Increase, Phase 3?
SAS FAB1 Heat Gen Capacity Increase, Phase 3 is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Demolition and replacement of heat gen fan H, its damper, and associated ductwork.
Is SAS FAB1 Heat Gen Capacity Increase, Phase 3 open in Austin?
SAS FAB1 Heat Gen Capacity Increase, Phase 3 is still under construction in Austin, TX, with an estimated completion of Aug 2027 according to its TDLR registration.
Where is SAS FAB1 Heat Gen Capacity Increase, Phase 3 located?
SAS FAB1 Heat Gen Capacity Increase, Phase 3 is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.
Who is the owner or developer of SAS FAB1 Heat Gen Capacity Increase, Phase 3?
Samsung is the property owner/developer of record for SAS FAB1 Heat Gen Capacity Increase, Phase 3, per its TDLR project registration.
Who is the architect or design firm for SAS FAB1 Heat Gen Capacity Increase, Phase 3?
Fuse Architecture Studio is the design firm of record for SAS FAB1 Heat Gen Capacity Increase, Phase 3, according to its TDLR filing.
How much does SAS FAB1 Heat Gen Capacity Increase, Phase 3 cost and how big is it?
SAS FAB1 Heat Gen Capacity Increase, Phase 3 has an estimated construction value of $1.7M and approximately 20,000 square feet (about $83/sqft), based on its TDLR filing.
Scope of Work
Demolition and replacement of heat gen fan H, its damper, and associated ductwork.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
12100 Samsung Blvd, Austin, TX, 78754
Related Projects
Same Owner
$3.3M totalNearby Projects
Within 0.6 miRelated City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work hvac change out
Replacement of complete existing central heat and air system with or without duct work HVAC change out is in the hallway of the 4th floor of the main office building. No unit number.
ETJ Irrigation installation Ref: 2026-053796 W
Installation of a 134x9-0 in-ground concrete pool
Interior remodel existing light manufacturing facility - FAB1 TMAH Replacement - F126-CH01.
Watch all construction in 78754 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Austin?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.