Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS FAB2 CLNS TMAH Conversion

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS FAB2 CLNS TMAH Conversion is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $630K across about 2,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026011617

$630K

Project Value

2,000

Square Feet

$315/sqft

Cost/SqFt

4 months

Duration

Registered:Feb 3, 2026

Start:Feb 17, 2026

Target:Jun 22, 2026

📝

Review Complete

Design review complete, construction may proceed

SAS FAB2 CLNS TMAH Conversion is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $630K covering 2,000 sq ft. SAMSUNG AUSTIN SEMICONDUCTOR is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on February 3, 2026.

❓Frequently Asked Questions

What is SAS FAB2 CLNS TMAH Conversion?

SAS FAB2 CLNS TMAH Conversion is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: design and installation of (1) T-Box and (1) VMB within the FAB2 CSF to expand the existing TMAH(2.38%) distribution in FAB2.

Is SAS FAB2 CLNS TMAH Conversion open in Austin?

SAS FAB2 CLNS TMAH Conversion is currently under construction in Austin, TX. Its current TDLR status is "Review Complete".

Where is SAS FAB2 CLNS TMAH Conversion located?

SAS FAB2 CLNS TMAH Conversion is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS FAB2 CLNS TMAH Conversion?

SAMSUNG AUSTIN SEMICONDUCTOR is the property owner/developer of record for SAS FAB2 CLNS TMAH Conversion, per its TDLR project registration.

Who is the architect or design firm for SAS FAB2 CLNS TMAH Conversion?

Fuse Architecture Studio is the design firm of record for SAS FAB2 CLNS TMAH Conversion, according to its TDLR filing.

How much does SAS FAB2 CLNS TMAH Conversion cost and how big is it?

SAS FAB2 CLNS TMAH Conversion has an estimated construction value of $630K and approximately 2,000 square feet (about $315/sqft), based on its TDLR filing.

📋Scope of Work

design and installation of (1) T-Box and (1) VMB within the FAB2 CSF to expand the existing TMAH(2.38%) distribution in FAB2.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.