Opening ~May 2027📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Kubota Training Facility

14855 FAA Blvd., Fort Worth, TX 76155, Fort Worth, TX, 76155

Kubota Training Facility is a new construction project at 14855 FAA Blvd., Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion May 2027. The project has an estimated value of $9.0M across about 29,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026005064

$9.0M

Project Value

29,000

Square Feet

$310/sqft

Cost/SqFt

1y 2mo

Duration

Registered:Nov 4, 2025

Start:Mar 1, 2026

Target:May 1, 2027

Remaining:312 days

📝

Review Complete

Design review complete, construction may proceed

Kubota Training Facility is a New Construction project located at 14855 FAA Blvd., Fort Worth, TX 76155 in Fort Worth, Texas. The project has an estimated value of $9.0M covering 29,000 sq ft. Kubota Tractor Corporation is the property owner and Page Southerland Page, Inc. is the design firm of record. The project was registered with TDLR on November 4, 2025.

❓Frequently Asked Questions

What is Kubota Training Facility?

Kubota Training Facility is a new construction project at 14855 FAA Blvd. in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Vocational training facility

Is Kubota Training Facility open in Fort Worth?

Kubota Training Facility is still under construction in Fort Worth, TX, with an estimated completion of May 2027 according to its TDLR registration.

Where is Kubota Training Facility located?

Kubota Training Facility is located at 14855 FAA Blvd., Fort Worth, TX, 76155, in Tarrant County.

Who is the owner or developer of Kubota Training Facility?

Kubota Tractor Corporation is the property owner/developer of record for Kubota Training Facility, per its TDLR project registration.

Who is the architect or design firm for Kubota Training Facility?

Page Southerland Page, Inc. is the design firm of record for Kubota Training Facility, according to its TDLR filing.

How much does Kubota Training Facility cost and how big is it?

Kubota Training Facility has an estimated construction value of $9.0M and approximately 29,000 square feet (about $310/sqft), based on its TDLR filing.

📋Scope of Work

Vocational training facility

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.