Northpoint Church - Platform is a renovation/alteration project at 10860 E Crystal Falls Pkwy, Bldg 10, Leander, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jan 2027. The project has an estimated value of $67K across about 1,332 sq ft.
Design review complete, construction may proceed
Northpoint Church - Platform is a Renovation/Alteration project located at 10860 E Crystal Falls Pkwy, Bldg 10, Leander, TX 78641 in Leander, Texas. The project has an estimated value of $67K covering 1,332 sq ft. Northpoint Austin is the property owner and Studio Indigo Design, LLC is the design firm of record. The project was registered with TDLR on November 26, 2025.
Northpoint Church - Platform is a renovation/alteration project at 10860 E Crystal Falls Pkwy, Bldg 10 in Leander, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of wood-framed platform in existing tenant finish-out.
Northpoint Church - Platform is still under construction in Leander, TX, with an estimated completion of Jan 2027 according to its TDLR registration.
Northpoint Church - Platform is located at 10860 E Crystal Falls Pkwy, Bldg 10, Leander, TX, 78641, in Williamson County.
Northpoint Austin is the property owner/developer of record for Northpoint Church - Platform, per its TDLR project registration.
Studio Indigo Design, LLC is the design firm of record for Northpoint Church - Platform, according to its TDLR filing.
Northpoint Church - Platform has an estimated construction value of $67K and approximately 1,332 square feet (about $50/sqft), based on its TDLR filing.
Construction of wood-framed platform in existing tenant finish-out.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Nov 26, 2025
Review Complete
Dec 2, 2025
Inspection Complete
Closed
6d
Review duration