Opening ~Dec 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Omnisource Metal Recycling Facility (Dayton)

401 Riverbend Way, Dayton, TX 77535, Dayton, TX, 77535

Omnisource Metal Recycling Facility (Dayton) is a new construction project at 401 Riverbend Way, Dayton, in Liberty County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $10.0M across about 3,490 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026009845

$10.0M

Project Value

3,490

Square Feet

$2.87K/sqft

Cost/SqFt

11 months

Duration

Registered:Jan 12, 2026

Start:Jan 12, 2026

Target:Dec 1, 2026

Remaining:117 days

📝

Review Complete

Design review complete, construction may proceed

Omnisource Metal Recycling Facility (Dayton) is a New Construction project located at 401 Riverbend Way, Dayton, TX 77535 in Dayton, Texas. The project has an estimated value of $10.0M covering 3,490 sq ft. OMNISOURCE SOUTHWEST LLC is the property owner. The project was registered with TDLR on January 12, 2026.

❓Frequently Asked Questions

What is Omnisource Metal Recycling Facility (Dayton)?

Omnisource Metal Recycling Facility (Dayton) is a new construction project at 401 Riverbend Way in Dayton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: ground up construction of 3,490 sf metal building and associated site improvements.

Is Omnisource Metal Recycling Facility (Dayton) open in Dayton?

Omnisource Metal Recycling Facility (Dayton) is still under construction in Dayton, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is Omnisource Metal Recycling Facility (Dayton) located?

Omnisource Metal Recycling Facility (Dayton) is located at 401 Riverbend Way, Dayton, TX, 77535, in Liberty County.

Who is the owner or developer of Omnisource Metal Recycling Facility (Dayton)?

OMNISOURCE SOUTHWEST LLC is the property owner/developer of record for Omnisource Metal Recycling Facility (Dayton), per its TDLR project registration.

How much does Omnisource Metal Recycling Facility (Dayton) cost and how big is it?

Omnisource Metal Recycling Facility (Dayton) has an estimated construction value of $10.0M and approximately 3,490 square feet (about $2.87K/sqft), based on its TDLR filing.

📋Scope of Work

ground up construction of 3,490 sf metal building and associated site improvements.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.