Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

QuikTrip # 871 Fryer Project

🗂️ View unified construction timeline →

1900 Altamesa Blvd, Fort Worth, TX 76134, Fort Worth, TX, 76134

QuikTrip # 871 Fryer Project is a renovation/alteration project at 1900 Altamesa Blvd, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $125K across about 300 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026011874

$125K

Project Value

300

Square Feet

$417/sqft

Cost/SqFt

1 months

Duration

Registered:Feb 6, 2026

Start:May 31, 2026

Target:Jun 15, 2026

📝

Review Complete

Design review complete, construction may proceed

QuikTrip # 871 Fryer Project is a Renovation/Alteration project located at 1900 Altamesa Blvd, Fort Worth, TX 76134 in Fort Worth, Texas. The project has an estimated value of $125K covering 300 sq ft. QT South, LLC is the property owner and Daniel D. Filuk, Architect is the design firm of record. The project was registered with TDLR on February 6, 2026.

❓Frequently Asked Questions

What is QuikTrip # 871 Fryer Project?

QuikTrip # 871 Fryer Project is a renovation/alteration project at 1900 Altamesa Blvd in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Includes reorganization of existing kitchen equipment and addition of new fryer units. Project 300sf

Is QuikTrip # 871 Fryer Project open in Fort Worth?

QuikTrip # 871 Fryer Project is currently under construction in Fort Worth, TX. Its current TDLR status is "Review Complete".

Where is QuikTrip # 871 Fryer Project located?

QuikTrip # 871 Fryer Project is located at 1900 Altamesa Blvd, Fort Worth, TX, 76134, in Tarrant County.

Who is the owner or developer of QuikTrip # 871 Fryer Project?

QT South, LLC is the property owner/developer of record for QuikTrip # 871 Fryer Project, per its TDLR project registration.

Who is the architect or design firm for QuikTrip # 871 Fryer Project?

Daniel D. Filuk, Architect is the design firm of record for QuikTrip # 871 Fryer Project, according to its TDLR filing.

How much does QuikTrip # 871 Fryer Project cost and how big is it?

QuikTrip # 871 Fryer Project has an estimated construction value of $125K and approximately 300 square feet (about $417/sqft), based on its TDLR filing.

📋Scope of Work

Includes reorganization of existing kitchen equipment and addition of new fryer units. Project 300sf

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.