Funding type
This project is privately funded, on private land for private use.
RPM Drafting & Design in Midland, TX
10012 Liberator, Midland, TX, 79706
RPM Drafting & Design is a new construction project at 10012 Liberator, Midland, in Midland County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Jul 2026 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $450K across about 6,000 sq ft.
- Estimated project value
- $450K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 6,000 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $75/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 4 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
4 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
16 days after the preceding date shown.
Source: TDLR filing
View source recordReview complete · TDLR filing
The filing records completion of the accessibility review.
2 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
120 days after the preceding date shown.
Source: TDLR filing
View source record
📰About RPM Drafting & Design
RPM Drafting & Design is a new construction project located at 10012 Liberator in Midland, Texas. The filing describes a 6,000 sq ft metal building with an attached 40x40 office. The owner of record is Krmp-Nm LLC. The estimated cost for this build is $450,000.
The project is situated in the Indus Park Reg Air Term area of Midland County. It is privately funded and sits on private land for private use. The registered accessibility specialist for this filing is Peter Walper. The work was registered with TDLR in February 2026.
Timeline and Scope
Plan review for the structure was completed in March 2026. Construction was scheduled to begin in March 2026, with a planned completion date of July 2026. The scheduled build window is 122 days. This duration is shorter than the county median of 243 days for similar new construction filings.
The estimated cost per square foot is $75. This figure is below the county median of $169 per sq ft. The total estimated cost of $450,000 places the project in the bottom quarter of costs for new construction in Midland County. The median estimated cost for the area is $1,000,000.
TDLR has not yet recorded a final inspection for this project. The completion date on the filing has passed, but the current state of the site is not confirmed in the public record. The status remains Review Complete with no final inspection recorded.
Local Context
The site is near several established businesses, including Baymont by Wyndham Midland Airport and AirKing Aviation. The ZIP code 79706 has a population of about 32,605 according to Census estimates. The median household income in this area is $110,988. Housing in the region is predominantly owner-occupied.
Midland County has a median housing value of $280,500 for owner-occupied homes. The local labor market shows an unemployment rate of 3.4 percent . The project adds to the commercial and industrial infrastructure in this part of the Permian Basin.
Review Complete
Design review complete, construction may proceed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 79706 (Midland)
One email per change. Unsubscribe in one click. Privacy.
RPM Drafting & Design is a New Construction project located at 10012 Liberator, Midland, TX 79706 in Midland, Texas. The project has an estimated value of $450K covering 6,000 sq ft. KRMP-NM LLC is the property owner. The project was registered with TDLR on February 13, 2026.
Frequently Asked Questions
Is RPM Drafting & Design open for business?
The TDLR record shows the project has not yet recorded a final inspection. There is no public confirmation that the business is open or operating. The status is strictly construction-related.
Who owns the building at 10012 Liberator?
The owner of record listed in the TDLR filing is Krmp-Nm LLC. The project is privately funded and located on private land in Midland County.
What is the size of the new building?
The filing specifies a 6,000 sq ft metal building. It also includes an attached office measuring 40 by 40 feet. The total estimated cost is $450,000.
When was the construction scheduled to finish?
The filing listed a completion date of July 2026. However, TDLR has not yet recorded a final inspection, so the actual status of the site is unconfirmed in the public record.
Who is the registered accessibility specialist?
Peter Walper is the registered accessibility specialist listed for this project. The registration with TDLR occurred in February 2026, with plan review completed in March 2026.
What is RPM Drafting & Design?
RPM Drafting & Design is a new construction project at 10012 Liberator in Midland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Metal Building 6000 sq ft with a 40x40 office attached
Is RPM Drafting & Design open in Midland?
RPM Drafting & Design was scheduled to finish construction in Jul 2026 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.
Where is RPM Drafting & Design located?
RPM Drafting & Design is located at 10012 Liberator, Midland, TX, 79706, in Midland County.
Who is the owner or developer of RPM Drafting & Design?
KRMP-NM LLC is the property owner/developer of record for RPM Drafting & Design, per its TDLR project registration.
How much does RPM Drafting & Design cost and how big is it?
RPM Drafting & Design has an estimated construction value of $450K and approximately 6,000 square feet (about $75/sqft), based on its TDLR filing.
Scope of Work
Metal Building 6000 sq ft with a 40x40 office attached
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
10012 Liberator, Midland, TX, 79706
Watch all construction in 79706 (Midland)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Midland?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.