Opening ~Nov 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

FB Steel CNC Shop

13600 S Gessner Rd, Missouri City, TX 77489, Missouri City, TX, 77489

FB Steel CNC Shop is a renovation/alteration project at 13600 S Gessner Rd, Missouri City, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Nov 2026. The project has an estimated value of $230K across about 7,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026013773

$230K

Project Value

7,000

Square Feet

$33/sqft

Cost/SqFt

7 months

Duration

Registered:Feb 27, 2026

Start:Apr 15, 2026

Target:Nov 18, 2026

Remaining:135 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

FB Steel CNC Shop is a Renovation/Alteration project located at 13600 S Gessner Rd, Missouri City, TX 77489 in Missouri City, Texas. The project has an estimated value of $230K covering 7,000 sq ft. Ta Investment, LLC is the property owner and MoGo Architects PLLC is the design firm of record. The project was registered with TDLR on February 27, 2026.

❓Frequently Asked Questions

What is FB Steel CNC Shop?

FB Steel CNC Shop is a renovation/alteration project at 13600 S Gessner Rd in Missouri City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior build offices within shell building

Is FB Steel CNC Shop open in Missouri City?

FB Steel CNC Shop is still under construction in Missouri City, TX, with an estimated completion of Nov 2026 according to its TDLR registration.

Where is FB Steel CNC Shop located?

FB Steel CNC Shop is located at 13600 S Gessner Rd, Missouri City, TX, 77489, in Fort Bend County.

Who is the owner or developer of FB Steel CNC Shop?

Ta Investment, LLC is the property owner/developer of record for FB Steel CNC Shop, per its TDLR project registration.

Who is the architect or design firm for FB Steel CNC Shop?

MoGo Architects PLLC is the design firm of record for FB Steel CNC Shop, according to its TDLR filing.

How much does FB Steel CNC Shop cost and how big is it?

FB Steel CNC Shop has an estimated construction value of $230K and approximately 7,000 square feet (about $33/sqft), based on its TDLR filing.

📋Scope of Work

Interior build offices within shell building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.