Opening ~Nov 2026📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Star Pipe Products, LTD - Phase II

13650 Pike Road, Stafford, TX 77477, Stafford, TX, 77477

Star Pipe Products, LTD - Phase II is a renovation/alteration project at 13650 Pike Road, Stafford, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Nov 2026. The project has an estimated value of $15.0M across about 200,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026016844

$15.0M

Project Value

200,000

Square Feet

$75/sqft

Cost/SqFt

6 months

Duration

Registered:Apr 6, 2026

Start:Jun 8, 2026

Target:Nov 30, 2026

Remaining:160 days

📝

Review Complete

Design review complete, construction may proceed

Star Pipe Products, LTD - Phase II is a Renovation/Alteration project located at 13650 Pike Road, Stafford, TX 77477 in Stafford, Texas. The project has an estimated value of $15.0M covering 200,000 sq ft. Star Pipe Products, LTD is the property owner and Joiner Architects, Inc. is the design firm of record. The project was registered with TDLR on April 6, 2026.

❓Frequently Asked Questions

What is Star Pipe Products, LTD - Phase II?

Star Pipe Products, LTD - Phase II is a renovation/alteration project at 13650 Pike Road in Stafford, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior office buildout/ additions for compressors/HVAC

Is Star Pipe Products, LTD - Phase II open in Stafford?

Star Pipe Products, LTD - Phase II is still under construction in Stafford, TX, with an estimated completion of Nov 2026 according to its TDLR registration.

Where is Star Pipe Products, LTD - Phase II located?

Star Pipe Products, LTD - Phase II is located at 13650 Pike Road, Stafford, TX, 77477, in Harris County.

Who is the owner or developer of Star Pipe Products, LTD - Phase II?

Star Pipe Products, LTD is the property owner/developer of record for Star Pipe Products, LTD - Phase II, per its TDLR project registration.

Who is the architect or design firm for Star Pipe Products, LTD - Phase II?

Joiner Architects, Inc. is the design firm of record for Star Pipe Products, LTD - Phase II, according to its TDLR filing.

How much does Star Pipe Products, LTD - Phase II cost and how big is it?

Star Pipe Products, LTD - Phase II has an estimated construction value of $15.0M and approximately 200,000 square feet (about $75/sqft), based on its TDLR filing.

📋Scope of Work

Interior office buildout/ additions for compressors/HVAC

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.