Opening ~Jul 2026📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

NM/CT Equipment Replacement

1600 11th Street,, Wichita Falls, TX 76302, Wichita Falls, TX, 76302

NM/CT Equipment Replacement is a renovation/alteration project at 1600 11th Street, Wichita Falls, in Wichita County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jul 2026. The project has an estimated value of $300K across about 639 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026018002

$300K

Project Value

639

Square Feet

$469/sqft

Cost/SqFt

3 months

Duration

Registered:Apr 17, 2026

Start:Apr 30, 2026

Target:Jul 24, 2026

Remaining:31 days

📝

Review Complete

Design review complete, construction may proceed

NM/CT Equipment Replacement is a Renovation/Alteration project located at 1600 11th Street,, Wichita Falls, TX 76302 in Wichita Falls, Texas. The project has an estimated value of $300K covering 639 sq ft. United Regional Health Care System - jon Early is the property owner and GBA Architects, LLC is the design firm of record. The project was registered with TDLR on April 17, 2026.

❓Frequently Asked Questions

What is NM/CT Equipment Replacement?

NM/CT Equipment Replacement is a renovation/alteration project at 1600 11th Street in Wichita Falls, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Replace existing NM/CT Equipment

Is NM/CT Equipment Replacement open in Wichita Falls?

NM/CT Equipment Replacement is still under construction in Wichita Falls, TX, with an estimated completion of Jul 2026 according to its TDLR registration.

Where is NM/CT Equipment Replacement located?

NM/CT Equipment Replacement is located at 1600 11th Street, Wichita Falls, TX, 76302, in Wichita County.

Who is the owner or developer of NM/CT Equipment Replacement?

United Regional Health Care System - jon Early is the property owner/developer of record for NM/CT Equipment Replacement, per its TDLR project registration.

Who is the architect or design firm for NM/CT Equipment Replacement?

GBA Architects, LLC is the design firm of record for NM/CT Equipment Replacement, according to its TDLR filing.

How much does NM/CT Equipment Replacement cost and how big is it?

NM/CT Equipment Replacement has an estimated construction value of $300K and approximately 639 square feet (about $469/sqft), based on its TDLR filing.

📋Scope of Work

Replace existing NM/CT Equipment

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.