Funding type
This project is privately funded, on private land for private use.
Makin The Cut in Baytown, TX
5278 N Main Street Ste. 310, Baytown, TX, 77521
Makin The Cut is a new construction project at 5278 N Main Street Ste. 310, Baytown, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Aug 2026 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $95K across about 3,796 sq ft.
- Estimated project value
- $95K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 3,796 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $25/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 3 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
4 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordReview complete · TDLR filing
The filing records completion of the accessibility review.
5 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
27 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
88 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Makin The Cut
Makin The Cut is a new 3,796 sq ft indoor golf training facility located at 5278 N Main Street, Suite 310, in Baytown, Texas. The project is a tenant improvement within the District on Main building, specifically designed for indoor golf practice and simulator experiences. The filing identifies the work as new construction with an estimated cost of $94,500.
The owner of record is RDC 10 Main Investments, LLC, which has registered five other projects in Baytown under the District on North Main name. Apex Construction serves as the design firm of record for this specific build. The registered accessibility specialist is Tim Mullins. The project is privately funded on private land for private use.
TDLR completed plan review in May 2026. The scheduled construction window began in June 2026 and was set to finish in August 2026. This 88-day build schedule is shorter than the Harris County median of 219 days for new construction projects. The estimated cost per square foot is $25, which is below the county median of $88 per square foot.
While the scheduled completion date has passed, TDLR has not yet recorded a final inspection. This means the current state of the site is not confirmed in the public record. Third-party social media posts from the business expressed excitement about bringing the facility to Baytown, with one post mentioning a hope for an August arrival. However, the official construction status remains pending final inspection.
The surrounding ZIP code 77521 has a population of about 65,920 and a median household income of $76,012 according to Census estimates. The project fits within a broader portfolio of investments by RDC 10 Main Investments, LLC, which has registered projects totaling over $5.2 million in the area.
Searchers looking for Makin The Cut in Baytown should note that the TDLR record shows the project is in review complete status but lacks a final inspection record. The facility is described as an indoor golf training space with premium simulators. The construction details are specific to the tenant improvement scope rather than a full building erection.
Review Complete
Design review complete, construction may proceed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 77521 (Baytown)
One email per change. Unsubscribe in one click. Privacy.
Makin The Cut is a New Construction project located at 5278 N Main Street Ste. 310, Baytown, TX 77521 in Baytown, Texas. The project has an estimated value of $95K covering 3,796 sq ft. RDC 10 Main Investments, LLC is the property owner and Apex Construction is the design firm of record. The project was registered with TDLR on April 30, 2026.
Frequently Asked Questions
Is Makin The Cut open for business?
The TDLR record shows the project has not yet recorded a final inspection. While social media posts expressed hope for an August opening, the official construction status is not confirmed as complete in the public record.
Who owns the Makin The Cut project?
The owner of record is RDC 10 Main Investments, LLC. They are also the owner of record for several other projects at the District on North Main in Baytown.
How much did the construction cost?
The estimated cost for the 3,796 sq ft tenant improvement is $94,500. This works out to approximately $25 per square foot, which is below the Harris County median for new construction.
When was the project scheduled to finish?
The filing scheduled construction to start in June 2026 and finish in August 2026. TDLR completed plan review in May 2026, but has not yet recorded a final inspection.
Where is the facility located?
The facility is at 5278 N Main Street, Suite 310, Baytown, TX 77521. It is located in the District on Main building in Harris County.
What is Makin The Cut?
Makin The Cut is a new construction project at 5278 N Main Street Ste. 310 in Baytown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 3,796 sq. ft. tenant improvement for indoor golf training facility.
Is Makin The Cut open in Baytown?
Makin The Cut was scheduled to finish construction in Aug 2026 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.
Where is Makin The Cut located?
Makin The Cut is located at 5278 N Main Street Ste. 310, Baytown, TX, 77521, in Harris County.
Who is the owner or developer of Makin The Cut?
RDC 10 Main Investments, LLC is the property owner/developer of record for Makin The Cut, per its TDLR project registration.
Who is the architect or design firm for Makin The Cut?
Apex Construction is the design firm of record for Makin The Cut, according to its TDLR filing.
How much does Makin The Cut cost and how big is it?
Makin The Cut has an estimated construction value of $95K and approximately 3,796 square feet (about $25/sqft), based on its TDLR filing.
Scope of Work
3,796 sq. ft. tenant improvement for indoor golf training facility.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
5278 N Main Street Ste. 310, Baytown, TX, 77521
Related Projects
Same Owner
$320K totalWatch all construction in 77521 (Baytown)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Baytown?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.