Project intelligenceTDLR TABS2026020113Renovation/Alteration
Funding type

This project is privately funded, on private land for private use.

DIAB CNC ROOM ADDITION in Desoto, TX

220 E DANIELDALE DR, Desoto, TX, 75115

Target date passed (Oct 2026)Review Complete

DIAB CNC ROOM ADDITION is a renovation/alteration project at 220 E DANIELDALE DR, Desoto, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Oct 2026 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $675K across about 13,880 sq ft.

Estimated project value
$675K
About this figure

Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.

Reported floor area
13,880 ft²
About this figure

Square footage reported for this scope of work. It may cover only part of a larger property.

Estimated cost / ft²
$49/sqft
About this figure

Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.

Scheduled duration
4 months
About this figure

The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.

Explore the linked construction record and source history

The project record

Project timeline

Explore filed milestones and scheduled dates. Open a milestone for its source.

May 12, 2026142 days across supplied datesOct 1, 2026

4 timeline dates shown.

  1. Project registered · TDLR filing

    Registration of the project with the Texas Department of Licensing and Regulation.

    Source: TDLR filing

    View source record
  2. Review complete · TDLR filing

    The filing records completion of the accessibility review.

    6 days after the preceding date shown.

    Source: TDLR filing

    View source record
  3. Scheduled construction start · Scheduled date

    A date supplied in the filing; this does not confirm that work started or finished.

    14 days after the preceding date shown.

    Source: TDLR filing

    View source record
  4. Scheduled completion · Scheduled date

    A date supplied in the filing; this does not confirm that work started or finished.

    122 days after the preceding date shown.

    Source: TDLR filing

    View source record

📰About DIAB CNC ROOM ADDITION

Construction on a 13,880 sq ft interior renovation at 220 E Danieldale Dr in Desoto is scheduled to finish in October 2026. The project, filed under the name Diab CNC Room Addition, involves altering the interior space of a warehouse. TDLR plan review was completed in May 2026, and work is set to begin in June 2026.

The total estimated cost for this renovation is $675,000, which works out to $49 per square foot. This figure is below the Dallas County median of $72 per square foot for similar renovation and alteration filings. However, the total project cost places it in the top quarter of estimated costs for its type in the county, where the median is $249,000.

The owner of record is 220 Danieldale Owner, LLC, associated with Triumph Capital Group. Nove Studios LLC is the registered design firm. This is one of at least six other TDLR-registered projects by Nove Studios LLC in the region, totaling $1,600,000, including offices in Mckinney, Frisco, and Fort Worth. The registered accessibility specialist for this project is Brandon Mark Quimbey.

The scheduled build window is 122 days, from June to October 2026. This duration is longer than the 92-day median build window for renovation projects in Dallas County. The project is privately funded and located on private land for private use. Census estimates for ZIP 75115 show a population of about 55,997 and a median household income of $83,386.

Dallas County unemployment stood at 3.3 percent in July 2026, higher than a year earlier. The project status is Review Complete, with construction pending start. The TDLR record reflects construction timelines only and does not indicate operational status for the business.

Review Complete

Design review complete, construction may proceed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 75115 (Desoto)

One email per change. Unsubscribe in one click. Privacy.

DIAB CNC ROOM ADDITION is a Renovation/Alteration project located at 220 E DANIELDALE DR, Desoto, TX 75115 in Desoto, Texas. The project has an estimated value of $675K covering 13,880 sq ft. 220 Danieldale Owner, LLC C/O TRIUMPH CAPITAL GROUP is the property owner and NOVE STUDIOS LLC is the design firm of record. The project was registered with TDLR on May 12, 2026.

Frequently Asked Questions

What is the estimated cost of the renovation at 220 Danieldale?

The estimated cost is $675,000. This amount is above the Dallas County median for similar projects but the cost per square foot is below the county average.

Who is the design firm for this project?

Nove Studios LLC is the registered design firm. They have six other TDLR-registered projects in the area, including office renovations in Mckinney and Frisco.

What is the square footage of the work?

The scope of work covers 13,880 sq ft of interior space inside the warehouse. This is significantly larger than the median size of 4,226 sq ft for similar county filings.

Is the business at 220 Danieldale open?

The TDLR record shows construction is scheduled to start in June 2026 and finish in October 2026. It does not indicate that the business is open or operating.

What is DIAB CNC ROOM ADDITION?

DIAB CNC ROOM ADDITION is a renovation/alteration project at 220 E DANIELDALE DR in Desoto, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: INTERIOR SPACE INSIDE WAREHOUSE

Is DIAB CNC ROOM ADDITION open in Desoto?

DIAB CNC ROOM ADDITION was scheduled to finish construction in Oct 2026 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.

Where is DIAB CNC ROOM ADDITION located?

DIAB CNC ROOM ADDITION is located at 220 E DANIELDALE DR, Desoto, TX, 75115, in Dallas County.

Who is the owner or developer of DIAB CNC ROOM ADDITION?

220 Danieldale Owner, LLC C/O TRIUMPH CAPITAL GROUP is the property owner/developer of record for DIAB CNC ROOM ADDITION, per its TDLR project registration.

Who is the architect or design firm for DIAB CNC ROOM ADDITION?

NOVE STUDIOS LLC is the design firm of record for DIAB CNC ROOM ADDITION, according to its TDLR filing.

How much does DIAB CNC ROOM ADDITION cost and how big is it?

DIAB CNC ROOM ADDITION has an estimated construction value of $675K and approximately 13,880 square feet (about $49/sqft), based on its TDLR filing.

Scope of Work

INTERIOR SPACE INSIDE WAREHOUSE

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.

Location & views

220 E DANIELDALE DR, Desoto, TX, 75115

Explore the supplied address

A precise map point has not been loaded. Choose to look up the address, or open it in Google Maps using the link below.

Location by street address

Watch all construction in 75115 (Desoto)

A short email when anything new is filed in this ZIP. One ZIP free, weekly.

Unsubscribe in one click. Privacy.