Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

KalaSphere Studios

29907 Jordan Crossing Blvd, Fulshear, TX 77441, Fulshear, TX, 77441

KalaSphere Studios is a new construction project at 29907 Jordan Crossing Blvd, Fulshear, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $140K across about 2,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026020140

$140K

Project Value

2,000

Square Feet

$70/sqft

Cost/SqFt

0 months

Duration

Registered:May 13, 2026

Start:May 25, 2026

Target:Jun 8, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

KalaSphere Studios is a New Construction project located at 29907 Jordan Crossing Blvd, Fulshear, TX 77441 in Fulshear, Texas. The project has an estimated value of $140K covering 2,000 sq ft. Shops at Jordan Ranch Crossing, LLC is the property owner and Parkview Design & Construction is the design firm of record. The project was registered with TDLR on May 13, 2026.

❓Frequently Asked Questions

What is KalaSphere Studios?

KalaSphere Studios is a new construction project at 29907 Jordan Crossing Blvd in Fulshear, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Art Studio Build Out

Is KalaSphere Studios open in Fulshear?

KalaSphere Studios is currently under construction in Fulshear, TX. Its current TDLR status is "Project Registered".

Where is KalaSphere Studios located?

KalaSphere Studios is located at 29907 Jordan Crossing Blvd, Fulshear, TX, 77441, in Fort Bend County.

Who is the owner or developer of KalaSphere Studios?

Shops at Jordan Ranch Crossing, LLC is the property owner/developer of record for KalaSphere Studios, per its TDLR project registration.

Who is the architect or design firm for KalaSphere Studios?

Parkview Design & Construction is the design firm of record for KalaSphere Studios, according to its TDLR filing.

How much does KalaSphere Studios cost and how big is it?

KalaSphere Studios has an estimated construction value of $140K and approximately 2,000 square feet (about $70/sqft), based on its TDLR filing.

📋Scope of Work

Art Studio Build Out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.