Opening ~May 2027📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Caliber Collision

🗂️ View unified construction timeline →

3151 Justin Rd, Flower Mound, TX 75028, Flower Mound, TX, 75028

Caliber Collision is a renovation/alteration project at 3151 Justin Rd, Flower Mound, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion May 2027. The project has an estimated value of $1.5M across about 29,084 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026020774

$1.5M

Project Value

29,084

Square Feet

$52/sqft

Cost/SqFt

11 months

Duration

Registered:May 20, 2026

Start:Jun 30, 2026

Target:May 15, 2027

Remaining:306 days

📝

Review Complete

Design review complete, construction may proceed

Caliber Collision is a Renovation/Alteration project located at 3151 Justin Rd, Flower Mound, TX 75028 in Flower Mound, Texas. The project has an estimated value of $1.5M covering 29,084 sq ft. Cross Development CC Flower Mound Justin LLC is the property owner and Cross Architects is the design firm of record. The project was registered with TDLR on May 20, 2026.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a renovation/alteration project at 3151 Justin Rd in Flower Mound, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation of existing building

Is Caliber Collision open in Flower Mound?

Caliber Collision is still under construction in Flower Mound, TX, with an estimated completion of May 2027 according to its TDLR registration.

Where is Caliber Collision located?

Caliber Collision is located at 3151 Justin Rd, Flower Mound, TX, 75028, in Denton County.

Who is the owner or developer of Caliber Collision?

Cross Development CC Flower Mound Justin LLC is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

Cross Architects is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $1.5M and approximately 29,084 square feet (about $52/sqft), based on its TDLR filing.

📋Scope of Work

Renovation of existing building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.