Opening ~May 2027📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

VICKERY FLEX OFFICE

🗂️ View unified construction timeline →

5636 W. VICKERY BLVD, Fort Worth, TX 76107, Fort Worth, TX, 76107

VICKERY FLEX OFFICE is a new construction project at 5636 W. VICKERY BLVD, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion May 2027. The project has an estimated value of $2.0M across about 15,750 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026021420

$2.0M

Project Value

15,750

Square Feet

$127/sqft

Cost/SqFt

11 months

Duration

Registered:May 28, 2026

Start:Jun 30, 2026

Target:May 30, 2027

Remaining:310 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

VICKERY FLEX OFFICE is a New Construction project located at 5636 W. VICKERY BLVD, Fort Worth, TX 76107 in Fort Worth, Texas. The project has an estimated value of $2.0M covering 15,750 sq ft. VICKERY CAPITAL HOLDINGS LLC is the property owner and 97W is the design firm of record. The project was registered with TDLR on May 28, 2026.

❓Frequently Asked Questions

What is VICKERY FLEX OFFICE?

VICKERY FLEX OFFICE is a new construction project at 5636 W. VICKERY BLVD in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: NEW GROUND UP CONSTRUCTION OF (4) PARTIALLY CONDITIONED ONE STORY PRE ENGINEERED METAL BUILDING'S WITH SITE IMPROVEMENTS.

Is VICKERY FLEX OFFICE open in Fort Worth?

VICKERY FLEX OFFICE is still under construction in Fort Worth, TX, with an estimated completion of May 2027 according to its TDLR registration.

Where is VICKERY FLEX OFFICE located?

VICKERY FLEX OFFICE is located at 5636 W. VICKERY BLVD, Fort Worth, TX, 76107, in Tarrant County.

Who is the owner or developer of VICKERY FLEX OFFICE?

VICKERY CAPITAL HOLDINGS LLC is the property owner/developer of record for VICKERY FLEX OFFICE, per its TDLR project registration.

Who is the architect or design firm for VICKERY FLEX OFFICE?

97W is the design firm of record for VICKERY FLEX OFFICE, according to its TDLR filing.

How much does VICKERY FLEX OFFICE cost and how big is it?

VICKERY FLEX OFFICE has an estimated construction value of $2.0M and approximately 15,750 square feet (about $127/sqft), based on its TDLR filing.

📋Scope of Work

NEW GROUND UP CONSTRUCTION OF (4) PARTIALLY CONDITIONED ONE STORY PRE ENGINEERED METAL BUILDING'S WITH SITE IMPROVEMENTS.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.