Opening ~Sep 2027📋Project Registered🔧 Renovation/Alteration💵 This project involves public funds, public land, or is a Federally funded roadway project.

Birnamwood Blvd Segment 1

N/A, Spring, TX 77373, Spring, TX, 77373

Birnamwood Blvd Segment 1 is a renovation/alteration project at N/A, Spring, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Sep 2027. The project has an estimated value of $4.2M across about 172,757 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026022943

$4.2M

Project Value

172,757

Square Feet

$24/sqft

Cost/SqFt

1 year

Duration

Registered:Jun 16, 2026

Start:Sep 1, 2026

Target:Sep 1, 2027

Remaining:434 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Birnamwood Blvd Segment 1 is a Renovation/Alteration project located at N/A, Spring, TX 77373 in Spring, Texas. The project has an estimated value of $4.2M covering 172,757 sq ft. Harris County is the property owner and MBCO Engineering & Surveying, Inc. is the design firm of record. The project was registered with TDLR on June 16, 2026.

❓Frequently Asked Questions

What is Birnamwood Blvd Segment 1?

Birnamwood Blvd Segment 1 is a renovation/alteration project at N/A in Spring, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of south bound traffic lanes, improvements to existing roadway, addition of sidewalks on both sides of road, drainage improvements, traffic signal. Approximately 128,817 SF of disturbed area

Is Birnamwood Blvd Segment 1 open in Spring?

Birnamwood Blvd Segment 1 is still under construction in Spring, TX, with an estimated completion of Sep 2027 according to its TDLR registration.

Where is Birnamwood Blvd Segment 1 located?

Birnamwood Blvd Segment 1 is located at N/A, Spring, TX, 77373, in Harris County.

Who is the owner or developer of Birnamwood Blvd Segment 1?

Harris County is the property owner/developer of record for Birnamwood Blvd Segment 1, per its TDLR project registration.

Who is the architect or design firm for Birnamwood Blvd Segment 1?

MBCO Engineering & Surveying, Inc. is the design firm of record for Birnamwood Blvd Segment 1, according to its TDLR filing.

How much does Birnamwood Blvd Segment 1 cost and how big is it?

Birnamwood Blvd Segment 1 has an estimated construction value of $4.2M and approximately 172,757 square feet (about $24/sqft), based on its TDLR filing.

📋Scope of Work

Addition of south bound traffic lanes, improvements to existing roadway, addition of sidewalks on both sides of road, drainage improvements, traffic signal. Approximately 128,817 SF of disturbed area

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.