Opening ~Aug 2027📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Marek Sawing & Drilling

19510 Hufsmith Kohrville Rd., Tomball, TX 77375, Tomball, TX, 77375

Marek Sawing & Drilling is a new construction project at 19510 Hufsmith Kohrville Rd., Tomball, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Aug 2027. The project has an estimated value of $1.5M across about 20,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026024287

$1.5M

Project Value

20,000

Square Feet

$75/sqft

Cost/SqFt

1 year

Duration

Registered:Jul 1, 2026

Start:Aug 3, 2026

Target:Aug 3, 2027

Remaining:392 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Marek Sawing & Drilling is a New Construction project located at 19510 Hufsmith Kohrville Rd., Tomball, TX 77375 in Tomball, Texas. The project has an estimated value of $1.5M covering 20,000 sq ft. Hufsmith Kohrville Houston Group, LP is the property owner and Adkisson Group, Inc. is the design firm of record. The project was registered with TDLR on July 1, 2026.

❓Frequently Asked Questions

What is Marek Sawing & Drilling?

Marek Sawing & Drilling is a new construction project at 19510 Hufsmith Kohrville Rd. in Tomball, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: THIS PROJECT INVOLVES NEW CONSTRUCTION OF A 20,000 S.F., SPRINKLERED BUILDING, AND ASSOCIATED SITE WORK. PROJECT IS LOCATED AT 19510 HUFSMITH KOHRVILLE RD., TOMBALL TX, 77375, HARRIS CO., AND IS AN INTERIOR BUILD OUT FOR OFFICE SPACE WIT…

Is Marek Sawing & Drilling open in Tomball?

Marek Sawing & Drilling is still under construction in Tomball, TX, with an estimated completion of Aug 2027 according to its TDLR registration.

Where is Marek Sawing & Drilling located?

Marek Sawing & Drilling is located at 19510 Hufsmith Kohrville Rd., Tomball, TX, 77375, in Harris County.

Who is the owner or developer of Marek Sawing & Drilling?

Hufsmith Kohrville Houston Group, LP is the property owner/developer of record for Marek Sawing & Drilling, per its TDLR project registration.

Who is the architect or design firm for Marek Sawing & Drilling?

Adkisson Group, Inc. is the design firm of record for Marek Sawing & Drilling, according to its TDLR filing.

How much does Marek Sawing & Drilling cost and how big is it?

Marek Sawing & Drilling has an estimated construction value of $1.5M and approximately 20,000 square feet (about $75/sqft), based on its TDLR filing.

📋Scope of Work

THIS PROJECT INVOLVES NEW CONSTRUCTION OF A 20,000 S.F., SPRINKLERED BUILDING, AND ASSOCIATED SITE WORK. PROJECT IS LOCATED AT 19510 HUFSMITH KOHRVILLE RD., TOMBALL TX, 77375, HARRIS CO., AND IS AN INTERIOR BUILD OUT FOR OFFICE SPACE WITH MEZZANINE

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.