Opening ~Mar 2027📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

STERITEK III

1206 NORTH STEMMONS, Lewisville, TX 75027, Lewisville, TX, 75027

STERITEK III is a renovation/alteration project at 1206 NORTH STEMMONS, Lewisville, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Mar 2027. The project has an estimated value of $10.0M across about 12,100 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026024622

$10.0M

Project Value

12,100

Square Feet

$826/sqft

Cost/SqFt

8 months

Duration

Registered:Jul 7, 2026

Start:Aug 3, 2026

Target:Mar 31, 2027

Remaining:260 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

STERITEK III is a Renovation/Alteration project located at 1206 NORTH STEMMONS, Lewisville, TX 75027 in Lewisville, Texas. The project has an estimated value of $10.0M covering 12,100 sq ft. 1206 N. STEMMONS LLC is the property owner. The project was registered with TDLR on July 7, 2026.

❓Frequently Asked Questions

What is STERITEK III?

STERITEK III is a renovation/alteration project at 1206 NORTH STEMMONS in Lewisville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of a e-beam sterilization machine to an existing facility

Is STERITEK III open in Lewisville?

STERITEK III is still under construction in Lewisville, TX, with an estimated completion of Mar 2027 according to its TDLR registration.

Where is STERITEK III located?

STERITEK III is located at 1206 NORTH STEMMONS, Lewisville, TX, 75027, in Denton County.

Who is the owner or developer of STERITEK III?

1206 N. STEMMONS LLC is the property owner/developer of record for STERITEK III, per its TDLR project registration.

How much does STERITEK III cost and how big is it?

STERITEK III has an estimated construction value of $10.0M and approximately 12,100 square feet (about $826/sqft), based on its TDLR filing.

📋Scope of Work

Addition of a e-beam sterilization machine to an existing facility

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.