Funding type
This project is privately funded, on private land for private use.
Vector Automation Technologies, Inc. in Krum, TX
15460 US 380, Krum, TX, 76249
Vector Automation Technologies, Inc. is a new construction project at 15460 US 380, Krum, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Mar 2027. The project has an estimated value of $120K across about 5,000 sq ft.
- Estimated project value
- $120K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 5,000 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $24/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 6 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
50 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
181 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Vector Automation Technologies, Inc.
Vector Automation Technologies, Inc. is constructing a new 5,000-square-foot facility at 15460 US 380 in Krum, Texas. The project involves a 50-foot by 100-foot building structure, with an estimated cost of $120,000. This private development is registered with TDLR and is targeted for March 2027.
The owner of record is Steve Passariello. Huerta's Welding & Metal Work, LLC serves as the design firm of record for the project. Julio Garcia is the registered accessibility specialist associated with this filing. The construction is privately funded and located on private land for private use within Denton County.
Construction Timeline and Status
The project was registered with TDLR in July 2026. According to the filing, construction is scheduled to begin in September 2026. The current TDLR status is Project Registered, indicating that plan review is still pending. The completion date listed on the filing is March 2027, which aligns with the targeted finish date.
The scheduled build window is 181 days. This duration is close to the county median of 218 days for similar new construction filings in Denton County. The estimated cost of $120,000 is below the county median of $900,000 for this type of work. The cost per square foot is $24, which is below the county median of $121 per square foot. These figures place the project in the lower cost range compared to other recent filings in the area.
The surrounding area, ZIP code 76249, has a population of about 10,069 residents. The median household income in this area is $111,263, and the median owner-occupied home value is $304,300, according to U.S. Census ACS 2023 five-year estimates. Denton County unemployment was 4.3 percent in July 2026, higher than a year earlier, according to FRED data.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 76249 (Krum)
One email per change. Unsubscribe in one click. Privacy.
Vector Automation Technologies, Inc. is a New Construction project located at 15460 US 380, Krum, TX 76249 in Krum, Texas. The project has an estimated value of $120K covering 5,000 sq ft. Steve Passariello is the property owner and Huerta's Welding & Metal Work, LLC is the design firm of record. The project was registered with TDLR on July 13, 2026.
Frequently Asked Questions
When will the Vector Automation building in Krum be finished?
The project is targeted for March 2027. Construction is scheduled to start in September 2026, with a build window of 181 days.
Who is the owner of the new facility at 15460 US 380?
Steve Passariello is the owner of record. Huerta's Welding & Metal Work, LLC is the design firm, and Julio Garcia is the accessibility specialist.
How much does the new 5,000 sq ft building cost?
The estimated cost is $120,000. This equates to $24 per square foot, which is below the Denton County median for similar projects.
Is the Vector Automation facility in Krum open for business?
The TDLR record indicates the project is under construction and targeted for March 2027. Third-party directories describe the company as having 1-10 employees, but the construction status is pending.
What is Vector Automation Technologies, Inc.?
Vector Automation Technologies, Inc. is a new construction project at 15460 US 380 in Krum, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 50'x100' Building
Is Vector Automation Technologies, Inc. open in Krum?
Vector Automation Technologies, Inc. is still under construction in Krum, TX, with an estimated completion of Mar 2027 according to its TDLR registration.
Where is Vector Automation Technologies, Inc. located?
Vector Automation Technologies, Inc. is located at 15460 US 380, Krum, TX, 76249, in Denton County.
Who is the owner or developer of Vector Automation Technologies, Inc.?
Steve Passariello is the property owner/developer of record for Vector Automation Technologies, Inc., per its TDLR project registration.
Who is the architect or design firm for Vector Automation Technologies, Inc.?
Huerta's Welding & Metal Work, LLC is the design firm of record for Vector Automation Technologies, Inc., according to its TDLR filing.
How much does Vector Automation Technologies, Inc. cost and how big is it?
Vector Automation Technologies, Inc. has an estimated construction value of $120K and approximately 5,000 square feet (about $24/sqft), based on its TDLR filing.
Scope of Work
50'x100' Building
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
15460 US 380, Krum, TX, 76249
Watch all construction in 76249 (Krum)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Krum?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.