Opening ~Jul 2028📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Pagosa Springs Phase 3

2101 West 28th Street, Bryan, TX 77803, Bryan, TX, 77803

Pagosa Springs Phase 3 is a new construction project at 2101 West 28th Street, Bryan, in Brazos County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jul 2028. The project has an estimated value of $100K across about 10,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026026456

$100K

Project Value

10,000

Square Feet

$10/sqft

Cost/SqFt

2 years

Duration

Registered:Jul 29, 2026

Start:Jul 29, 2026

Target:Jul 29, 2028

Remaining:724 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Pagosa Springs Phase 3 is a New Construction project located at 2101 West 28th Street, Bryan, TX 77803 in Bryan, Texas. The project has an estimated value of $100K covering 10,000 sq ft. BCS Pagosa Springs LLC is the property owner and McClure and Browne Engineering is the design firm of record. The project was registered with TDLR on July 29, 2026.

❓Frequently Asked Questions

What is Pagosa Springs Phase 3?

Pagosa Springs Phase 3 is a new construction project at 2101 West 28th Street in Bryan, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Sidewalks for a subdivision in the City of Bryan right of way

Is Pagosa Springs Phase 3 open in Bryan?

Pagosa Springs Phase 3 is still under construction in Bryan, TX, with an estimated completion of Jul 2028 according to its TDLR registration.

Where is Pagosa Springs Phase 3 located?

Pagosa Springs Phase 3 is located at 2101 West 28th Street, Bryan, TX, 77803, in Brazos County.

Who is the owner or developer of Pagosa Springs Phase 3?

BCS Pagosa Springs LLC is the property owner/developer of record for Pagosa Springs Phase 3, per its TDLR project registration.

Who is the architect or design firm for Pagosa Springs Phase 3?

McClure and Browne Engineering is the design firm of record for Pagosa Springs Phase 3, according to its TDLR filing.

How much does Pagosa Springs Phase 3 cost and how big is it?

Pagosa Springs Phase 3 has an estimated construction value of $100K and approximately 10,000 square feet (about $10/sqft), based on its TDLR filing.

📋Scope of Work

Sidewalks for a subdivision in the City of Bryan right of way

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.