Funding type
This project is privately funded, on private land for private use.
Plastic Pipes Institute
105 Decker Court Suite 825, Irving, TX, 75062
Plastic Pipes Institute is a renovation/alteration project at 105 Decker Court Suite 825, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $168K across about 3,069 sq ft.
- Estimated project value
- $168K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 3,069 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $55/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 4 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
7 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
105 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Plastic Pipes Institute
The Plastic Pipes Institute is undergoing a 3,069-square-foot interior renovation at Crestview Tower in Irving. Located at 105 Decker Court Suite 825, this project involves a non-structural finish-out of an existing single-floor suite. The estimated cost is $168,000, equating to $55 per square foot. Construction is targeted for December 2026.
Registered with TDLR in September 2026, the project is in the plan review stage. The scope of work includes updates to HVAC, electrical, and plumbing systems within the suite. The owner of record is RCP Crestview SPE LLC, and the design firm is idGROUP. Fred Dean Shinault is the registered accessibility specialist for this filing.
Project Context and Comparison
Compared to 32,443 renovation and alteration filings in Dallas County, this project’s estimated cost is below the county median of $248,661. The median cost for similar projects in the county is $248,661, with a middle half ranging from $120,000 to $591,875. The median size for these projects is 4,226 square feet, and the median cost per square foot is $72. This project’s 105-day scheduled build window is close to the county median of 92 days.
RCP Crestview SPE LLC has five other TDLR-registered projects in Irving under the Crestview Tower name, totaling $2,296,251. These include projects with costs of $154,000, $193,251, $600,000, $199,000, and $1,150,000. The design firm idGROUP has six other registered projects totaling $4,678,060, including locations in Fort Worth, Irving, Addison, and Plano.
Local Area and Funding
The project is privately funded on private land for private use. It is located in ZIP code 75062, where the U.S. Census ACS 2023 five-year estimates indicate a population of about 52,756 and a median household income of $70,792. The area has 18,718 housing units, with a median owner-occupied home value of $254,500. Housing in this ZIP code is mostly renter-occupied.
Dallas County recorded an unemployment rate of 3.3 percent in July 2026, according to FRED data. This rate is higher than a year earlier. The project status is Project Registered, with plan review pending.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 75062 (Irving)
One email per change. Unsubscribe in one click. Privacy.
Plastic Pipes Institute is a Renovation/Alteration project located at 105 Decker Court Suite 825, Irving, TX 75062 in Irving, Texas. The project has an estimated value of $168K covering 3,069 sq ft. RCP Crestview SPE LLC is the property owner and idGROUP is the design firm of record. The project was registered with TDLR on September 9, 2026.
Frequently Asked Questions
What is the current status of the Plastic Pipes Institute renovation?
The project is registered with TDLR . Plan review is pending, and completion is targeted for December 2026. The work involves a non-structural interior finish-out of a 3,069-square-foot suite.
Who is the owner and design firm for this project?
The owner of record is RCP Crestview SPE LLC. The design firm of record is idGROUP. Fred Dean Shinault is the registered accessibility specialist. The project is privately funded for private use.
How does this project’s cost compare to other renovations in Dallas County?
The estimated cost of $168,000 is below the Dallas County median of $248,661 for renovation and alteration filings. The cost per square foot is $55, which is below the county median of $72 per square foot.
Is the Plastic Pipes Institute business open to the public?
The TDLR record covers construction status only. It indicates the project is registered and targeted for December 2026 completion, but it does not confirm whether the business is open or operating.
What is the scope of work for this renovation?
The scope includes a non-structural interior finish-out in an existing single-floor suite. Specific work areas include HVAC, electrical, and plumbing systems. The total square footage is 3,069 sq ft.
What is Plastic Pipes Institute?
Plastic Pipes Institute is a renovation/alteration project at 105 Decker Court Suite 825 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The scope of this project is a non-structural interior finish-out in an existing single floor suite. Scope includes HVAC, electrical, and plumbing.
Is Plastic Pipes Institute open in Irving?
Plastic Pipes Institute is still under construction in Irving, TX, with an estimated completion of Dec 2026 according to its TDLR registration.
Where is Plastic Pipes Institute located?
Plastic Pipes Institute is located at 105 Decker Court Suite 825, Irving, TX, 75062, in Dallas County.
Who is the owner or developer of Plastic Pipes Institute?
RCP Crestview SPE LLC is the property owner/developer of record for Plastic Pipes Institute, per its TDLR project registration.
Who is the architect or design firm for Plastic Pipes Institute?
idGROUP is the design firm of record for Plastic Pipes Institute, according to its TDLR filing.
How much does Plastic Pipes Institute cost and how big is it?
Plastic Pipes Institute has an estimated construction value of $168K and approximately 3,069 square feet (about $55/sqft), based on its TDLR filing.
Scope of Work
The scope of this project is a non-structural interior finish-out in an existing single floor suite. Scope includes HVAC, electrical, and plumbing.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
105 Decker Court Suite 825, Irving, TX, 75062
Related Projects
Same Owner
$1.1M totalNearby Projects
Within 1 kmWatch all construction in 75062 (Irving)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Irving?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.