Construction complete · Dec 2019🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Project Ripple

5419 Wendland Rd, Temple, TX 76501, Temple, TX, 76501

Project Ripple is a new construction project at 5419 Wendland Rd, Temple, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2019). The project has an estimated value of $32.5M across about 553,712 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019005887

$32.5M

Project Value

553,712

Square Feet

$59/sqft

Cost/SqFt

10 months

Duration

Registered:Feb 27, 2019

Start:Mar 5, 2019

Target:Dec 25, 2019

🏁

Project Closed

Project has been completed and closed

Project Ripple is a New Construction project located at 5419 Wendland Rd, Temple, TX 76501 in Temple, Texas. The project has an estimated value of $32.5M covering 553,712 sq ft. Tanglefoot Properties, LLC Attn. Todd Uhlick is the property owner and MPA Architects is the design firm of record. The project was registered with TDLR on February 27, 2019.

❓Frequently Asked Questions

What is Project Ripple?

Project Ripple is a new construction project at 5419 Wendland Rd in Temple, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Type II-B Water Bottling and Warehouse Building including a 5k sf Office, B, F2, S2 Occupancy, concrete tilt-up wall panels with TPO roof system over steel joist and girders, NFPA 13 Automatic Fire Sprinkler System and External Water Silos

Is Project Ripple open in Temple?

Construction on Project Ripple is complete — TDLR records show the project passed its required accessibility inspection in Dec 2019. The building is finished and very likely open.

Where is Project Ripple located?

Project Ripple is located at 5419 Wendland Rd, Temple, TX, 76501, in Bell County.

Who is the owner or developer of Project Ripple?

Tanglefoot Properties, LLC Attn. Todd Uhlick is the property owner/developer of record for Project Ripple, per its TDLR project registration.

Who is the architect or design firm for Project Ripple?

MPA Architects is the design firm of record for Project Ripple, according to its TDLR filing.

How much does Project Ripple cost and how big is it?

Project Ripple has an estimated construction value of $32.5M and approximately 553,712 square feet (about $59/sqft), based on its TDLR filing.

📋Scope of Work

Type II-B Water Bottling and Warehouse Building including a 5k sf Office, B, F2, S2 Occupancy, concrete tilt-up wall panels with TPO roof system over steel joist and girders, NFPA 13 Automatic Fire Sprinkler System and External Water Silos

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.