DTTP - Office-to-Manufacturing Connector
DTTP - Office-to-Manufacturing Connector is a renovation/alteration project at 19001 Kermier Road, Waller, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2020). The project has an estimated value of $910K across about 1,557 sq ft.
📊Project Metrics
TDLR #TABS2020001030Project Closed
Project has been completed and closed
DTTP - Office-to-Manufacturing Connector is a Renovation/Alteration project located at 19001 Kermier Road, Waller, TX 77484 in Waller, Texas. The project has an estimated value of $910K covering 1,557 sq ft. Daikin is the property owner and Inventure Design is the design firm of record. The project was registered with TDLR on September 17, 2019.
❓Frequently Asked Questions
What is DTTP - Office-to-Manufacturing Connector?
DTTP - Office-to-Manufacturing Connector is a renovation/alteration project at 19001 Kermier Road in Waller, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of walkway in manufacturing.
Is DTTP - Office-to-Manufacturing Connector open in Waller?
Construction on DTTP - Office-to-Manufacturing Connector is complete — TDLR records show the project passed its required accessibility inspection in Mar 2020. The building is finished and very likely open.
Where is DTTP - Office-to-Manufacturing Connector located?
DTTP - Office-to-Manufacturing Connector is located at 19001 Kermier Road, Waller, TX, 77484, in Harris County.
Who is the owner or developer of DTTP - Office-to-Manufacturing Connector?
Daikin is the property owner/developer of record for DTTP - Office-to-Manufacturing Connector, per its TDLR project registration.
Who is the architect or design firm for DTTP - Office-to-Manufacturing Connector?
Inventure Design is the design firm of record for DTTP - Office-to-Manufacturing Connector, according to its TDLR filing.
How much does DTTP - Office-to-Manufacturing Connector cost and how big is it?
DTTP - Office-to-Manufacturing Connector has an estimated construction value of $910K and approximately 1,557 square feet (about $584/sqft), based on its TDLR filing.
📋Scope of Work
Addition of walkway in manufacturing.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Sep 17, 2019
Review Complete
Inspection Complete
Closed
Mar 31, 2020