Funding type
This project is privately funded, on private land for private use.
123 Manufacturing Shell Reno in Dallas, TX
123 Manufacturing Street, Dallas, TX, 75207
123 Manufacturing Shell Reno is a renovation/alteration project at 123 Manufacturing Street, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish May 2020 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $485K across about 4,500 sq ft.
- Estimated project value
- $485K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 4,500 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $108/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 2 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
27 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
63 days after the preceding date shown.
Source: TDLR filing
View source record
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 75207 (Dallas)
One email per change. Unsubscribe in one click. Privacy.
123 Manufacturing Shell Reno is a Renovation/Alteration project located at 123 Manufacturing Street, Dallas, TX 75207 in Dallas, Texas. The project has an estimated value of $485K covering 4,500 sq ft. Quadrant Investment Properties, LLC is the property owner and GMA Architects is the design firm of record. The project was registered with TDLR on February 4, 2020.
Frequently Asked Questions
What is 123 Manufacturing Shell Reno?
123 Manufacturing Shell Reno is a renovation/alteration project at 123 Manufacturing Street in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Shell renovations including MEP rework, facade renovations, and slab modifications.
Is 123 Manufacturing Shell Reno open in Dallas?
123 Manufacturing Shell Reno was scheduled to finish construction in May 2020 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.
Where is 123 Manufacturing Shell Reno located?
123 Manufacturing Shell Reno is located at 123 Manufacturing Street, Dallas, TX, 75207, in Dallas County.
Who is the owner or developer of 123 Manufacturing Shell Reno?
Quadrant Investment Properties, LLC is the property owner/developer of record for 123 Manufacturing Shell Reno, per its TDLR project registration.
Who is the architect or design firm for 123 Manufacturing Shell Reno?
GMA Architects is the design firm of record for 123 Manufacturing Shell Reno, according to its TDLR filing.
How much does 123 Manufacturing Shell Reno cost and how big is it?
123 Manufacturing Shell Reno has an estimated construction value of $485K and approximately 4,500 square feet (about $108/sqft), based on its TDLR filing.
Scope of Work
Shell renovations including MEP rework, facade renovations, and slab modifications.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
123 Manufacturing Street, Dallas, TX, 75207
Related Projects
Watch all construction in 75207 (Dallas)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Dallas?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.