Construction complete · Sep 2021🏁Project Closed🏗️ New Construction💵 This project involves public funds, public land, or is a Federally funded roadway project.

BS 36J Mill and Inlay

BS 36J at BU 290F, Brenham, TX 77833, Brenham, TX, 77833

BS 36J Mill and Inlay is a new construction project at BS 36J at BU 290F, Brenham, in Washington County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2021). The project has an estimated value of $2.7M across about 12,307 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020019156

$2.7M

Project Value

12,307

Square Feet

$220/sqft

Cost/SqFt

7 months

Duration

Registered:Jun 17, 2020

Start:Feb 1, 2021

Target:Sep 1, 2021

🏁

Project Closed

Project has been completed and closed

BS 36J Mill and Inlay is a New Construction project located at BS 36J at BU 290F, Brenham, TX 77833 in Brenham, Texas. The project has an estimated value of $2.7M covering 12,307 sq ft. TxDOT District: Bryan is the property owner. The project was registered with TDLR on June 17, 2020.

❓Frequently Asked Questions

What is BS 36J Mill and Inlay?

BS 36J Mill and Inlay is a new construction project at BS 36J at BU 290F in Brenham, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Asphalt Mill and Inlay with installation of concrete sidewalk extensions, curb ramps, and intersection crosswalks.

Is BS 36J Mill and Inlay open in Brenham?

Construction on BS 36J Mill and Inlay is complete — TDLR records show the project passed its required accessibility inspection in Sep 2021. The building is finished and very likely open.

Where is BS 36J Mill and Inlay located?

BS 36J Mill and Inlay is located at BS 36J at BU 290F, Brenham, TX, 77833, in Washington County.

Who is the owner or developer of BS 36J Mill and Inlay?

TxDOT District: Bryan is the property owner/developer of record for BS 36J Mill and Inlay, per its TDLR project registration.

How much does BS 36J Mill and Inlay cost and how big is it?

BS 36J Mill and Inlay has an estimated construction value of $2.7M and approximately 12,307 square feet (about $220/sqft), based on its TDLR filing.

📋Scope of Work

Asphalt Mill and Inlay with installation of concrete sidewalk extensions, curb ramps, and intersection crosswalks.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.