Construction complete · Oct 2021✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

JM STEEL

85334 Hwy 89, Sinton, TX 78387, Sinton, TX, 78387

JM STEEL is a new construction project at 85334 Hwy 89, Sinton, in San Patricio County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2021). The project has an estimated value of $7.5M across about 98,570 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2021000811

$7.5M

Project Value

98,570

Square Feet

$76/sqft

Cost/SqFt

1 year

Duration

Registered:Sep 15, 2020

Start:Oct 1, 2020

Target:Oct 1, 2021

✅

Inspection Complete

Final inspection completed, awaiting project closure

JM STEEL is a New Construction project located at 85334 Hwy 89, Sinton, TX 78387 in Sinton, Texas. The project has an estimated value of $7.5M covering 98,570 sq ft. JM STEEL is the property owner and Powers Brown Architecture is the design firm of record. The project was registered with TDLR on September 15, 2020.

❓Frequently Asked Questions

What is JM STEEL?

JM STEEL is a new construction project at 85334 Hwy 89 in Sinton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: FACILITY FOR THE FABRICATION OF STEEL W/ OFFICE

Is JM STEEL open in Sinton?

Construction on JM STEEL is complete — TDLR records show the project passed its required accessibility inspection in Oct 2021. The building is finished and very likely open.

Where is JM STEEL located?

JM STEEL is located at 85334 Hwy 89, Sinton, TX, 78387, in San Patricio County.

Who is the owner or developer of JM STEEL?

JM STEEL is the property owner/developer of record for JM STEEL, per its TDLR project registration.

Who is the architect or design firm for JM STEEL?

Powers Brown Architecture is the design firm of record for JM STEEL, according to its TDLR filing.

How much does JM STEEL cost and how big is it?

JM STEEL has an estimated construction value of $7.5M and approximately 98,570 square feet (about $76/sqft), based on its TDLR filing.

📋Scope of Work

FACILITY FOR THE FABRICATION OF STEEL W/ OFFICE

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.