AMAT B30 Cleanroom Conversion - Phase 1
AMAT B30 Cleanroom Conversion - Phase 1 is a renovation/alteration project at 9700 US 290, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2023). The project has an estimated value of $6.0M across about 26,250 sq ft.
📊Project Metrics
TDLR #TABS2022027067Project Closed
Project has been completed and closed
AMAT B30 Cleanroom Conversion - Phase 1 is a Renovation/Alteration project located at 9700 US 290, Austin, TX 78724 in Austin, Texas. The project has an estimated value of $6.0M covering 26,250 sq ft. Applied Materials is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on August 25, 2022.
❓Frequently Asked Questions
What is AMAT B30 Cleanroom Conversion - Phase 1?
AMAT B30 Cleanroom Conversion - Phase 1 is a renovation/alteration project at 9700 US 290 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Conversion of existing warehouse space into an ISO 7 (Class 10,000) cleanroom with a small ISO 6 (Class 1,000) cleanroom within it. Phase 1 will be separated from Phase 2 (design in progress) by a temporary cleanroom partition.
Is AMAT B30 Cleanroom Conversion - Phase 1 open in Austin?
Construction on AMAT B30 Cleanroom Conversion - Phase 1 is complete — TDLR records show the project passed its required accessibility inspection in Mar 2023. The building is finished and very likely open.
Where is AMAT B30 Cleanroom Conversion - Phase 1 located?
AMAT B30 Cleanroom Conversion - Phase 1 is located at 9700 US 290, Austin, TX, 78724, in Travis County.
Who is the owner or developer of AMAT B30 Cleanroom Conversion - Phase 1?
Applied Materials is the property owner/developer of record for AMAT B30 Cleanroom Conversion - Phase 1, per its TDLR project registration.
Who is the architect or design firm for AMAT B30 Cleanroom Conversion - Phase 1?
Fuse Architecture Studio is the design firm of record for AMAT B30 Cleanroom Conversion - Phase 1, according to its TDLR filing.
How much does AMAT B30 Cleanroom Conversion - Phase 1 cost and how big is it?
AMAT B30 Cleanroom Conversion - Phase 1 has an estimated construction value of $6.0M and approximately 26,250 square feet (about $229/sqft), based on its TDLR filing.
📋Scope of Work
Conversion of existing warehouse space into an ISO 7 (Class 10,000) cleanroom with a small ISO 6 (Class 1,000) cleanroom within it. Phase 1 will be separated from Phase 2 (design in progress) by a temporary cleanroom partition.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Aug 25, 2022
Review Complete
Inspection Complete
Closed
Mar 30, 2023
🔗Related Projects
👤Same Owner
$9.6M total📄Related City Permits
Building permits found at or near this location
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Rip and replace fiber optic cable on cell tower ground cabinets trenching for new conduit.
INSTALL NEW 200 AMP PANELBOARD FOR B34 CSMG MF TEST BAY.