Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Terminal E Connector Phase 1

2400 Aviation Dr, Dallas, TX 75261, Dallas, TX, 75261

Terminal E Connector Phase 1 is a renovation/alteration project at 2400 Aviation Dr, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $250K across about 17,706 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2023013306

$250K

Project Value

17,706

Square Feet

$14/sqft

Cost/SqFt

1 months

Duration

Registered:Mar 3, 2023

Start:Mar 13, 2023

Target:Apr 13, 2023

📝

Review Complete

Design review complete, construction may proceed

Terminal E Connector Phase 1 is a Renovation/Alteration project located at 2400 Aviation Dr, Dallas, TX 75261 in Dallas, Texas. The project has an estimated value of $250K covering 17,706 sq ft. DFW Airport is the property owner and Moody Nolan is the design firm of record. The project was registered with TDLR on March 3, 2023.

❓Frequently Asked Questions

What is Terminal E Connector Phase 1?

Terminal E Connector Phase 1 is a renovation/alteration project at 2400 Aviation Dr in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Moving existing strobes and occupancy sensors from wall to ceiling and changing single door to double door

Is Terminal E Connector Phase 1 open in Dallas?

Terminal E Connector Phase 1 is currently under construction in Dallas, TX. Its current TDLR status is "Review Complete".

Where is Terminal E Connector Phase 1 located?

Terminal E Connector Phase 1 is located at 2400 Aviation Dr, Dallas, TX, 75261, in Dallas County.

Who is the owner or developer of Terminal E Connector Phase 1?

DFW Airport is the property owner/developer of record for Terminal E Connector Phase 1, per its TDLR project registration.

Who is the architect or design firm for Terminal E Connector Phase 1?

Moody Nolan is the design firm of record for Terminal E Connector Phase 1, according to its TDLR filing.

How much does Terminal E Connector Phase 1 cost and how big is it?

Terminal E Connector Phase 1 has an estimated construction value of $250K and approximately 17,706 square feet (about $14/sqft), based on its TDLR filing.

📋Scope of Work

Moving existing strobes and occupancy sensors from wall to ceiling and changing single door to double door

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.