Construction complete · Feb 2025🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Penske

29335 Highway 90, Katy, TX 77494, Katy, TX, 77494

Penske is a renovation/alteration project at 29335 Highway 90, Katy, in Waller County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2025). The project has an estimated value of $5.0M across about 39,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023016751

$5.0M

Project Value

39,000

Square Feet

$128/sqft

Cost/SqFt

1y 8mo

Duration

Registered:Apr 17, 2023

Start:Jun 19, 2023

Target:Feb 20, 2025

🏁

Project Closed

Project has been completed and closed

Penske is a Renovation/Alteration project located at 29335 Highway 90, Katy, TX 77494 in Katy, Texas. The project has an estimated value of $5.0M covering 39,000 sq ft. Penske Corporation, Inc. is the property owner and Tramonte Design Studio is the design firm of record. The project was registered with TDLR on April 17, 2023.

❓Frequently Asked Questions

What is Penske?

Penske is a renovation/alteration project at 29335 Highway 90 in Katy, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Remodel existing warehouse to accommodate Penske vehicles for repair.

Is Penske open in Katy?

Construction on Penske is complete — TDLR records show the project passed its required accessibility inspection in Feb 2025. The building is finished and very likely open.

Where is Penske located?

Penske is located at 29335 Highway 90, Katy, TX, 77494, in Waller County.

Who is the owner or developer of Penske?

Penske Corporation, Inc. is the property owner/developer of record for Penske, per its TDLR project registration.

Who is the architect or design firm for Penske?

Tramonte Design Studio is the design firm of record for Penske, according to its TDLR filing.

How much does Penske cost and how big is it?

Penske has an estimated construction value of $5.0M and approximately 39,000 square feet (about $128/sqft), based on its TDLR filing.

📋Scope of Work

Remodel existing warehouse to accommodate Penske vehicles for repair.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.