Under construction📝Review Complete🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Spring Branch Automotive

8963 Spring Branch Drive, Houston, TX 77080, Houston, TX, 77080

Spring Branch Automotive is a additions to existing building project at 8963 Spring Branch Drive, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $111K across about 2,808 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2023027091

$111K

Project Value

2,808

Square Feet

$39/sqft

Cost/SqFt

6 months

Duration

Registered:Aug 30, 2023

Start:Aug 29, 2023

Target:Feb 28, 2024

📝

Review Complete

Design review complete, construction may proceed

Spring Branch Automotive is a Additions to Existing Building project located at 8963 Spring Branch Drive, Houston, TX 77080 in Houston, Texas. The project has an estimated value of $111K covering 2,808 sq ft. Hany Ahmed is the property owner and Catalyst Technical Group, Inc. is the design firm of record. The project was registered with TDLR on August 30, 2023.

❓Frequently Asked Questions

What is Spring Branch Automotive?

Spring Branch Automotive is a additions to existing building project at 8963 Spring Branch Drive in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Canopy addition

Is Spring Branch Automotive open in Houston?

Spring Branch Automotive is currently under construction in Houston, TX. Its current TDLR status is "Review Complete".

Where is Spring Branch Automotive located?

Spring Branch Automotive is located at 8963 Spring Branch Drive, Houston, TX, 77080, in Harris County.

Who is the owner or developer of Spring Branch Automotive?

Hany Ahmed is the property owner/developer of record for Spring Branch Automotive, per its TDLR project registration.

Who is the architect or design firm for Spring Branch Automotive?

Catalyst Technical Group, Inc. is the design firm of record for Spring Branch Automotive, according to its TDLR filing.

How much does Spring Branch Automotive cost and how big is it?

Spring Branch Automotive has an estimated construction value of $111K and approximately 2,808 square feet (about $39/sqft), based on its TDLR filing.

📋Scope of Work

Canopy addition

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.