Construction complete · Sep 2024✅Inspection Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

At Fault

2330 Jett Street, Farmers Branch, TX 75234, Farmers Branch, TX, 75234

At Fault is a renovation/alteration project at 2330 Jett Street, Farmers Branch, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2024). The project has an estimated value of $1.5M across about 20,953 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2024003411

$1.5M

Project Value

20,953

Square Feet

$72/sqft

Cost/SqFt

10 months

Duration

Registered:Oct 18, 2023

Start:Dec 1, 2023

Target:Sep 30, 2024

✅

Inspection Complete

Final inspection completed, awaiting project closure

At Fault is a Renovation/Alteration project located at 2330 Jett Street, Farmers Branch, TX 75234 in Farmers Branch, Texas. The project has an estimated value of $1.5M covering 20,953 sq ft. Top Door Venture, LLC is the property owner and 5G Studio Collaborative is the design firm of record. The project was registered with TDLR on October 18, 2023.

❓Frequently Asked Questions

What is At Fault?

At Fault is a renovation/alteration project at 2330 Jett Street in Farmers Branch, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation an existing building core and shell only with site work

Is At Fault open in Farmers Branch?

Construction on At Fault is complete — TDLR records show the project passed its required accessibility inspection in Sep 2024. The building is finished and very likely open.

Where is At Fault located?

At Fault is located at 2330 Jett Street, Farmers Branch, TX, 75234, in Dallas County.

Who is the owner or developer of At Fault?

Top Door Venture, LLC is the property owner/developer of record for At Fault, per its TDLR project registration.

Who is the architect or design firm for At Fault?

5G Studio Collaborative is the design firm of record for At Fault, according to its TDLR filing.

How much does At Fault cost and how big is it?

At Fault has an estimated construction value of $1.5M and approximately 20,953 square feet (about $72/sqft), based on its TDLR filing.

📋Scope of Work

Renovation an existing building core and shell only with site work

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.