AMAT B30 Manufacturing Support Areas Fit-Up
AMAT B30 Manufacturing Support Areas Fit-Up is a renovation/alteration project at 10801 Giles Lane, Bldg. 30, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2024). The project has an estimated value of $560K across about 30,795 sq ft.
Project Metrics
TDLR #TABS2024007554Project Closed
Project has been completed and closed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78724 (Austin)
One email per change. Unsubscribe in one click. Privacy.
AMAT B30 Manufacturing Support Areas Fit-Up is a Renovation/Alteration project located at 10801 Giles Lane, Bldg. 30, Austin, TX 78724 in Austin, Texas. The project has an estimated value of $560K covering 30,795 sq ft. Applied Materials is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on December 15, 2023.
Frequently Asked Questions
What is AMAT B30 Manufacturing Support Areas Fit-Up?
AMAT B30 Manufacturing Support Areas Fit-Up is a renovation/alteration project at 10801 Giles Lane, Bldg. 30 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovations of the Storage Areas to create a Break Room Area, Locker Room and miscellaneous office spaces.
Is AMAT B30 Manufacturing Support Areas Fit-Up open in Austin?
Construction on AMAT B30 Manufacturing Support Areas Fit-Up is complete — TDLR records show the project passed its required accessibility inspection in Dec 2024. The building is finished and very likely open.
Where is AMAT B30 Manufacturing Support Areas Fit-Up located?
AMAT B30 Manufacturing Support Areas Fit-Up is located at 10801 Giles Lane, Bldg. 30, Austin, TX, 78724, in Travis County.
Who is the owner or developer of AMAT B30 Manufacturing Support Areas Fit-Up?
Applied Materials is the property owner/developer of record for AMAT B30 Manufacturing Support Areas Fit-Up, per its TDLR project registration.
Who is the architect or design firm for AMAT B30 Manufacturing Support Areas Fit-Up?
Fuse Architecture Studio is the design firm of record for AMAT B30 Manufacturing Support Areas Fit-Up, according to its TDLR filing.
How much does AMAT B30 Manufacturing Support Areas Fit-Up cost and how big is it?
AMAT B30 Manufacturing Support Areas Fit-Up has an estimated construction value of $560K and approximately 30,795 square feet (about $18/sqft), based on its TDLR filing.
Scope of Work
Renovations of the Storage Areas to create a Break Room Area, Locker Room and miscellaneous office spaces.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Compliance Timeline
Project Timeline
Filed
Dec 15, 2023
Review Complete
Inspection Complete
Closed
Dec 31, 2024
Related Projects
Same Owner
$9.6M totalRelated City Permits
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work
Replacement of an existing water heater
Exterior Main panel replacement U/G
Replacement of complete existing central heat and air system with or without duct work
Replacement of complete existing central heat and air system with or without duct work
Property Owner
Design Firm
Registered Accessibility Specialist
Explore Area
Watch all construction in 78724 (Austin)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.