Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Reed Engineering

4201 Spring Valley Suite 570, Farmers Branch, TX 75524, Farmers Branch, TX, 75524

Reed Engineering is a renovation/alteration project at 4201 Spring Valley Suite 570, Farmers Branch, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $127K across about 1,941 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2024012212

$127K

Project Value

1,941

Square Feet

$66/sqft

Cost/SqFt

3 months

Duration

Registered:Feb 22, 2024

Start:Feb 22, 2024

Target:Jun 1, 2024

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Reed Engineering is a Renovation/Alteration project located at 4201 Spring Valley Suite 570, Farmers Branch, TX 75524 in Farmers Branch, Texas. The project has an estimated value of $127K covering 1,941 sq ft. JP-4201 Spring Valley, LP is the property owner and Entos Design is the design firm of record. The project was registered with TDLR on February 22, 2024.

❓Frequently Asked Questions

What is Reed Engineering?

Reed Engineering is a renovation/alteration project at 4201 Spring Valley Suite 570 in Farmers Branch, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant Improvement

Is Reed Engineering open in Farmers Branch?

Reed Engineering is currently under construction in Farmers Branch, TX. Its current TDLR status is "Project Registered".

Where is Reed Engineering located?

Reed Engineering is located at 4201 Spring Valley Suite 570, Farmers Branch, TX, 75524, in Dallas County.

Who is the owner or developer of Reed Engineering?

JP-4201 Spring Valley, LP is the property owner/developer of record for Reed Engineering, per its TDLR project registration.

Who is the architect or design firm for Reed Engineering?

Entos Design is the design firm of record for Reed Engineering, according to its TDLR filing.

How much does Reed Engineering cost and how big is it?

Reed Engineering has an estimated construction value of $127K and approximately 1,941 square feet (about $66/sqft), based on its TDLR filing.

📋Scope of Work

Tenant Improvement

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.