Alcon ASPEX Metrology Lab Relocation
Alcon ASPEX Metrology Lab Relocation is a renovation/alteration project at 6500 Will Rogers Blvd, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2024). The project has an estimated value of $275K across about 1,000 sq ft.
📊Project Metrics
TDLR #TABS2024021509Project Closed
Project has been completed and closed
Alcon ASPEX Metrology Lab Relocation is a Renovation/Alteration project located at 6500 Will Rogers Blvd, Fort Worth, TX 76134 in Fort Worth, Texas. The project has an estimated value of $275K covering 1,000 sq ft. Alcon Laboratories is the property owner and EwingCole, Inc is the design firm of record. The project was registered with TDLR on June 24, 2024.
❓Frequently Asked Questions
What is Alcon ASPEX Metrology Lab Relocation?
Alcon ASPEX Metrology Lab Relocation is a renovation/alteration project at 6500 Will Rogers Blvd in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation of approximately 1,000 square feet on second floor to provide new space for Metrology Lab
Is Alcon ASPEX Metrology Lab Relocation open in Fort Worth?
Construction on Alcon ASPEX Metrology Lab Relocation is complete — TDLR records show the project passed its required accessibility inspection in Oct 2024. The building is finished and very likely open.
Where is Alcon ASPEX Metrology Lab Relocation located?
Alcon ASPEX Metrology Lab Relocation is located at 6500 Will Rogers Blvd, Fort Worth, TX, 76134, in Tarrant County.
Who is the owner or developer of Alcon ASPEX Metrology Lab Relocation?
Alcon Laboratories is the property owner/developer of record for Alcon ASPEX Metrology Lab Relocation, per its TDLR project registration.
Who is the architect or design firm for Alcon ASPEX Metrology Lab Relocation?
EwingCole, Inc is the design firm of record for Alcon ASPEX Metrology Lab Relocation, according to its TDLR filing.
How much does Alcon ASPEX Metrology Lab Relocation cost and how big is it?
Alcon ASPEX Metrology Lab Relocation has an estimated construction value of $275K and approximately 1,000 square feet (about $275/sqft), based on its TDLR filing.
📋Scope of Work
Renovation of approximately 1,000 square feet on second floor to provide new space for Metrology Lab
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 24, 2024
Review Complete
Inspection Complete
Closed
Oct 18, 2024