Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Kirby Smith Machinery, Inc.

Lot 1, Block A, Van Alstyne, TX, 75495

Kirby Smith Machinery, Inc. is a new construction project at Lot 1, Block A, Van Alstyne, in Grayson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $10.9M across about 29,619 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025010922

$10.9M

Project Value

29,619

Square Feet

$368/sqft

Cost/SqFt

11 months

Duration

Registered:Feb 3, 2025

Start:May 24, 2025

Target:Apr 26, 2026

📝

Review Complete

Design review complete, construction may proceed

Kirby Smith Machinery, Inc. is a New Construction project located at Lot 1, Block A in Van Alstyne, Texas. The project has an estimated value of $10.9M covering 29,619 sq ft. Kirby-Smith Machinery Inc. is the property owner and Parkway C&A LP is the design firm of record. The project was registered with TDLR on February 3, 2025.

❓Frequently Asked Questions

What is Kirby Smith Machinery, Inc.?

Kirby Smith Machinery, Inc. is a new construction project at Lot 1, Block A in Van Alstyne, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Project consists of site development and two new structures consisting of one ground-up metal building to house the office and shop areas, and an adjacent metal bldg for wash down.

Is Kirby Smith Machinery, Inc. open in Van Alstyne?

Kirby Smith Machinery, Inc. is currently under construction in Van Alstyne, TX. Its current TDLR status is "Review Complete".

Where is Kirby Smith Machinery, Inc. located?

Kirby Smith Machinery, Inc. is located at Lot 1, Block A, Van Alstyne, TX, 75495, in Grayson County.

Who is the owner or developer of Kirby Smith Machinery, Inc.?

Kirby-Smith Machinery Inc. is the property owner/developer of record for Kirby Smith Machinery, Inc., per its TDLR project registration.

Who is the architect or design firm for Kirby Smith Machinery, Inc.?

Parkway C&A LP is the design firm of record for Kirby Smith Machinery, Inc., according to its TDLR filing.

How much does Kirby Smith Machinery, Inc. cost and how big is it?

Kirby Smith Machinery, Inc. has an estimated construction value of $10.9M and approximately 29,619 square feet (about $368/sqft), based on its TDLR filing.

📋Scope of Work

Project consists of site development and two new structures consisting of one ground-up metal building to house the office and shop areas, and an adjacent metal bldg for wash down.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.