Construction complete · Apr 2025🏁Project Closed🔧 Renovation/Alteration💵 This project involves public funds, public land, or is a Federally funded roadway project.

UTSA BSE Sterilizer Install Rm 3.304A

One UTSA Circle, San Antonio, TX 78249, San Antonio, TX, 78249

UTSA BSE Sterilizer Install Rm 3.304A is a renovation/alteration project at One UTSA Circle, San Antonio, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2025). The project has an estimated value of $425K across about 452 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2025016070

$425K

Project Value

452

Square Feet

$940/sqft

Cost/SqFt

6 months

Duration

Registered:Apr 7, 2025

Start:May 15, 2025

Target:Nov 1, 2025

🏁

Project Closed

Project has been completed and closed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 78249 (San Antonio)

One email per change. Unsubscribe in one click. Privacy.

UTSA BSE Sterilizer Install Rm 3.304A is a Renovation/Alteration project located at One UTSA Circle, San Antonio, TX 78249 in San Antonio, Texas. The project has an estimated value of $425K covering 452 sq ft. UNIVERSITY OF TEXAS SYSTEM is the property owner and Chesney Morales Partners is the design firm of record. The project was registered with TDLR on April 7, 2025.

❓Frequently Asked Questions

What is UTSA BSE Sterilizer Install Rm 3.304A?

UTSA BSE Sterilizer Install Rm 3.304A is a renovation/alteration project at One UTSA Circle in San Antonio, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Removal of existing epoxy flooring, base, and gypsum wall, and gypsum board ceiling / devices at new location for dry heat sterilizer. New patching of floor, devices, control panel, gypsum board patching, and ceiling work included.

Is UTSA BSE Sterilizer Install Rm 3.304A open in San Antonio?

Construction on UTSA BSE Sterilizer Install Rm 3.304A is complete — TDLR records show the project passed its required accessibility inspection in Apr 2025. The building is finished and very likely open.

Where is UTSA BSE Sterilizer Install Rm 3.304A located?

UTSA BSE Sterilizer Install Rm 3.304A is located at One UTSA Circle, San Antonio, TX, 78249, in Bexar County.

Who is the owner or developer of UTSA BSE Sterilizer Install Rm 3.304A?

UNIVERSITY OF TEXAS SYSTEM is the property owner/developer of record for UTSA BSE Sterilizer Install Rm 3.304A, per its TDLR project registration.

Who is the architect or design firm for UTSA BSE Sterilizer Install Rm 3.304A?

Chesney Morales Partners is the design firm of record for UTSA BSE Sterilizer Install Rm 3.304A, according to its TDLR filing.

How much does UTSA BSE Sterilizer Install Rm 3.304A cost and how big is it?

UTSA BSE Sterilizer Install Rm 3.304A has an estimated construction value of $425K and approximately 452 square feet (about $940/sqft), based on its TDLR filing.

📋Scope of Work

Removal of existing epoxy flooring, base, and gypsum wall, and gypsum board ceiling / devices at new location for dry heat sterilizer. New patching of floor, devices, control panel, gypsum board patching, and ceiling work included.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.