Velera Print Rm & I.T. Stor.
Velera Print Rm & I.T. Stor. is a renovation/alteration project at 4950 Amon carter Blvd., Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $75K across about 3,100 sq ft.
📊Project Metrics
TDLR #TABS2025022392Review Complete
Design review complete, construction may proceed
Velera Print Rm & I.T. Stor. is a Renovation/Alteration project located at 4950 Amon carter Blvd., Fort Worth, TX 76155 in Fort Worth, Texas. The project has an estimated value of $75K covering 3,100 sq ft. Centreport Cuna, LLC, A Delawar Limited Liability Co. c/o KDC-CentrePort LP is the property owner and Alliance Architects, Inc. is the design firm of record. The project was registered with TDLR on June 30, 2025.
❓Frequently Asked Questions
What is Velera Print Rm & I.T. Stor.?
Velera Print Rm & I.T. Stor. is a renovation/alteration project at 4950 Amon carter Blvd. in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Remodel 2 conference rooms into a print/mail room and add a product storage room
Is Velera Print Rm & I.T. Stor. open in Fort Worth?
Velera Print Rm & I.T. Stor. is currently under construction in Fort Worth, TX. Its current TDLR status is "Review Complete".
Where is Velera Print Rm & I.T. Stor. located?
Velera Print Rm & I.T. Stor. is located at 4950 Amon carter Blvd., Fort Worth, TX, 76155, in Tarrant County.
Who is the owner or developer of Velera Print Rm & I.T. Stor.?
Centreport Cuna, LLC, A Delawar Limited Liability Co. c/o KDC-CentrePort LP is the property owner/developer of record for Velera Print Rm & I.T. Stor., per its TDLR project registration.
Who is the architect or design firm for Velera Print Rm & I.T. Stor.?
Alliance Architects, Inc. is the design firm of record for Velera Print Rm & I.T. Stor., according to its TDLR filing.
How much does Velera Print Rm & I.T. Stor. cost and how big is it?
Velera Print Rm & I.T. Stor. has an estimated construction value of $75K and approximately 3,100 square feet (about $24/sqft), based on its TDLR filing.
📋Scope of Work
Remodel 2 conference rooms into a print/mail room and add a product storage room
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 30, 2025
Review Complete
Jun 30, 2025
Inspection Complete
Closed