Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Mold Storage Building

814 S. Main St, Corsicana, TX, 75110

Mold Storage Building is a new construction project at 814 S. Main St, Corsicana, in Navarro County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $160K across about 5,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025024091

$160K

Project Value

5,000

Square Feet

$32/sqft

Cost/SqFt

2 months

Duration

Registered:Jul 22, 2025

Start:Sep 15, 2025

Target:Nov 14, 2025

📝

Review Complete

Design review complete, construction may proceed

Mold Storage Building is a New Construction project located at 814 S. Main St in Corsicana, Texas. The project has an estimated value of $160K covering 5,000 sq ft. Oil City Iron Works is the property owner and Seely, Watkins & Associates is the design firm of record. The project was registered with TDLR on July 22, 2025.

❓Frequently Asked Questions

What is Mold Storage Building?

Mold Storage Building is a new construction project at 814 S. Main St in Corsicana, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construct a 5,000 SqFt Metal Building for storage. The main frame columns will be anchored to new concrete footers. the floor of the building will be existing concrete paving.

Is Mold Storage Building open in Corsicana?

Mold Storage Building is currently under construction in Corsicana, TX. Its current TDLR status is "Review Complete".

Where is Mold Storage Building located?

Mold Storage Building is located at 814 S. Main St, Corsicana, TX, 75110, in Navarro County.

Who is the owner or developer of Mold Storage Building?

Oil City Iron Works is the property owner/developer of record for Mold Storage Building, per its TDLR project registration.

Who is the architect or design firm for Mold Storage Building?

Seely, Watkins & Associates is the design firm of record for Mold Storage Building, according to its TDLR filing.

How much does Mold Storage Building cost and how big is it?

Mold Storage Building has an estimated construction value of $160K and approximately 5,000 square feet (about $32/sqft), based on its TDLR filing.

📋Scope of Work

Construct a 5,000 SqFt Metal Building for storage. The main frame columns will be anchored to new concrete footers. the floor of the building will be existing concrete paving.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.