Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Oakmont Subdivision Phase 6A2

Oakmont at Catamount, Bryan, TX 77802, Bryan, TX, 77802

Oakmont Subdivision Phase 6A2 is a new construction project at Oakmont at Catamount, Bryan, in Brazos County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $917K across about 7,500 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025026528

$917K

Project Value

7,500

Square Feet

$122/sqft

Cost/SqFt

9 months

Duration

Registered:Aug 22, 2025

Start:Aug 25, 2025

Target:Jun 2, 2026

📝

Review Complete

Design review complete, construction may proceed

Oakmont Subdivision Phase 6A2 is a New Construction project located at Oakmont at Catamount, Bryan, TX 77802 in Bryan, Texas. The project has an estimated value of $917K covering 7,500 sq ft. Adam Development Properties, LP is the property owner and McClure and Browne Engineering is the design firm of record. The project was registered with TDLR on August 22, 2025.

❓Frequently Asked Questions

What is Oakmont Subdivision Phase 6A2?

Oakmont Subdivision Phase 6A2 is a new construction project at Oakmont at Catamount in Bryan, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New roadway, infrastructure and sidewalks

Is Oakmont Subdivision Phase 6A2 open in Bryan?

Oakmont Subdivision Phase 6A2 is currently under construction in Bryan, TX. Its current TDLR status is "Review Complete".

Where is Oakmont Subdivision Phase 6A2 located?

Oakmont Subdivision Phase 6A2 is located at Oakmont at Catamount, Bryan, TX, 77802, in Brazos County.

Who is the owner or developer of Oakmont Subdivision Phase 6A2?

Adam Development Properties, LP is the property owner/developer of record for Oakmont Subdivision Phase 6A2, per its TDLR project registration.

Who is the architect or design firm for Oakmont Subdivision Phase 6A2?

McClure and Browne Engineering is the design firm of record for Oakmont Subdivision Phase 6A2, according to its TDLR filing.

How much does Oakmont Subdivision Phase 6A2 cost and how big is it?

Oakmont Subdivision Phase 6A2 has an estimated construction value of $917K and approximately 7,500 square feet (about $122/sqft), based on its TDLR filing.

📋Scope of Work

New roadway, infrastructure and sidewalks

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.