Funding type
This project is privately funded, on private land for private use.
Tapshot in Longview, TX
2630 Bill Owens Pkwy, Longview, TX, 75604
Tapshot is a renovation/alteration project at 2630 Bill Owens Pkwy, Longview, in Gregg County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Jan 2026 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $150K across about 2,400 sq ft.
- Estimated project value
- $150K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 2,400 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $63/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 4 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
7 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
117 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Tapshot
Tapshot, located at 2630 Bill Owens Pkwy in Longview, is a 2,400 sq ft renovation project registered with TDLR in September 2025. The filing describes a scope of work that includes demolishing and moving interior walls, converting one bathroom to ADA compliance, and adding a 200 sq ft kitchen extension built on existing concrete under the current roof. The project also lists parking lot repair and mini golf course repair as part of the update.
The estimated cost for this renovation is $150,000, which computes to $62 per square foot. This figure is below the median estimated cost of $250,000 for renovation and alteration filings in Gregg County, though the cost per square foot is close to the county median of $70. The scheduled build window of 117 days is longer than the county median of 92 days for similar projects.
The owner of record is Longview Putt-Putt INC, and the registered accessibility specialist is John C Tyson. The project is privately funded on private land for private use. While the filing targeted a completion date of January 2026, no plan review or inspection has been recorded since registration, so whether the work proceeded is not confirmed in the public record.
Project Context
Tapshot operates as a family-owned mini golf venue in Longview, as noted in a Facebook post describing the business as a 36-hole course with a self-serve beer tap. An Instagram post by the business also identifies it as a family-owned mini golf and event space in Longview, TX. Local coverage on longviewcoc.growthzoneapp.com lists the address and describes the venue as offering mini golf, pickleball, and a laser shot shooting simulator.
The surrounding area, ZIP 75604, has a population of about 31,714 and a median household income of $67,826 according to U.S. Census ACS 2023 five-year estimates. Other registered renovation projects in the Longview area include AutoZone, Facility Renovations, E642 Longview, Longview Mall, and Buckner Westminster Place.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 75604 (Longview)
One email per change. Unsubscribe in one click. Privacy.
Tapshot is a Renovation/Alteration project located at 2630 Bill Owens Pkwy, Longview, TX 75604 in Longview, Texas. The project has an estimated value of $150K covering 2,400 sq ft. LONGVIEW PUTT-PUTT INC is the property owner. The project was registered with TDLR on September 29, 2025.
Frequently Asked Questions
What is the scope of the Tapshot renovation?
The filing lists wall demolition and movement, ADA bathroom conversion, a 200 sq ft kitchen addition, parking lot repair, and mini golf course repair.
Is the Tapshot renovation complete?
The target completion date was January 2026, but no plan review or inspection has been recorded, so completion is not confirmed in the public record.
Who owns the Tapshot project?
The owner of record is Longview Putt-Putt INC, and the registered accessibility specialist is John C Tyson.
How much does the renovation cost?
The estimated cost is $150,000 for the 2,400 sq ft project, which is below the Gregg County median for similar filings.
Where is Tapshot located?
Tapshot is at 2630 Bill Owens Pkwy, Longview, TX 75604, in Gregg County outside the FEMA floodplain.
What is Tapshot?
Tapshot is a renovation/alteration project at 2630 Bill Owens Pkwy in Longview, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Building to be renovated and updated demolishing and moving of walls, turning one of the bathrooms into ADA Compliant. Adding on a 200sq ft kitchen that is on existing concrete and under existing roof. Parking lot repair, mini golf cours…
Is Tapshot open in Longview?
Tapshot was scheduled to finish construction in Jan 2026 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.
Who is the owner or developer of Tapshot?
LONGVIEW PUTT-PUTT INC is the property owner/developer of record for Tapshot, per its TDLR project registration.
How much does Tapshot cost and how big is it?
Tapshot has an estimated construction value of $150K and approximately 2,400 square feet (about $63/sqft), based on its TDLR filing.
Scope of Work
Building to be renovated and updated demolishing and moving of walls, turning one of the bathrooms into ADA Compliant. Adding on a 200sq ft kitchen that is on existing concrete and under existing roof. Parking lot repair, mini golf course repair,
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
2630 Bill Owens Pkwy, Longview, TX, 75604
Explore the supplied address
A precise map point has not been loaded. Choose to look up the address, or open it in Google Maps using the link below.
Watch all construction in 75604 (Longview)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Longview?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.