Opening ~Dec 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

PORTER-NORTH MANUFACTURING FACILITY

🗂️ View unified construction timeline →

21769 E. KNOX, Porter, TX 77365, Porter, TX, 77365

PORTER-NORTH MANUFACTURING FACILITY is a new construction project at 21769 E. KNOX, Porter, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $20.0M across about 315,649 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026016403

$20.0M

Project Value

315,649

Square Feet

$63/sqft

Cost/SqFt

9 months

Duration

Registered:Mar 31, 2026

Start:Apr 1, 2026

Target:Dec 31, 2026

Remaining:162 days

📝

Review Complete

Design review complete, construction may proceed

PORTER-NORTH MANUFACTURING FACILITY is a New Construction project located at 21769 E. KNOX, Porter, TX 77365 in Porter, Texas. The project has an estimated value of $20.0M covering 315,649 sq ft. 59 crossing is the property owner and Powers Brown Architecture is the design firm of record. The project was registered with TDLR on March 31, 2026.

❓Frequently Asked Questions

What is PORTER-NORTH MANUFACTURING FACILITY?

PORTER-NORTH MANUFACTURING FACILITY is a new construction project at 21769 E. KNOX in Porter, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: NEW CONSTRUCTION WITH ASSOCIATED SITEWORK. PRE-ENGINEERED METAL BUILDING WITH TILTWALL WAINSCOT THAT INCLUDES ACCESSORY AND 303,276 FACTORY. OWNER FOR ENTIRE FACILITY IS: POSTEL INTERNATIONAL, INC. THE FACTORY MANUFACTURES STEEL.

Is PORTER-NORTH MANUFACTURING FACILITY open in Porter?

PORTER-NORTH MANUFACTURING FACILITY is still under construction in Porter, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is PORTER-NORTH MANUFACTURING FACILITY located?

PORTER-NORTH MANUFACTURING FACILITY is located at 21769 E. KNOX, Porter, TX, 77365, in Montgomery County.

Who is the owner or developer of PORTER-NORTH MANUFACTURING FACILITY?

59 crossing is the property owner/developer of record for PORTER-NORTH MANUFACTURING FACILITY, per its TDLR project registration.

Who is the architect or design firm for PORTER-NORTH MANUFACTURING FACILITY?

Powers Brown Architecture is the design firm of record for PORTER-NORTH MANUFACTURING FACILITY, according to its TDLR filing.

How much does PORTER-NORTH MANUFACTURING FACILITY cost and how big is it?

PORTER-NORTH MANUFACTURING FACILITY has an estimated construction value of $20.0M and approximately 315,649 square feet (about $63/sqft), based on its TDLR filing.

📋Scope of Work

NEW CONSTRUCTION WITH ASSOCIATED SITEWORK. PRE-ENGINEERED METAL BUILDING WITH TILTWALL WAINSCOT THAT INCLUDES ACCESSORY AND 303,276 FACTORY. OWNER FOR ENTIRE FACILITY IS: POSTEL INTERNATIONAL, INC. THE FACTORY MANUFACTURES STEEL.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.