Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

iCode

120 South Denton Tap Road, Coppell, TX 75019, Coppell, TX, 75019

iCode is a renovation/alteration project at 120 South Denton Tap Road, Coppell, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $150K across about 2,535 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026019430

$150K

Project Value

2,535

Square Feet

$59/sqft

Cost/SqFt

1 months

Duration

Registered:May 5, 2026

Start:Jun 1, 2026

Target:Jul 6, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

iCode is a Renovation/Alteration project located at 120 South Denton Tap Road, Coppell, TX 75019 in Coppell, Texas. The project has an estimated value of $150K covering 2,535 sq ft. Coppell Village Inc. is the property owner and RSW Consultants is the design firm of record. The project was registered with TDLR on May 5, 2026.

❓Frequently Asked Questions

What is iCode?

iCode is a renovation/alteration project at 120 South Denton Tap Road in Coppell, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior tenant fit out 2,535 sq ft

Is iCode open in Coppell?

iCode is currently under construction in Coppell, TX. Its current TDLR status is "Project Registered".

Where is iCode located?

iCode is located at 120 South Denton Tap Road, Coppell, TX, 75019, in Dallas County.

Who is the owner or developer of iCode?

Coppell Village Inc. is the property owner/developer of record for iCode, per its TDLR project registration.

Who is the architect or design firm for iCode?

RSW Consultants is the design firm of record for iCode, according to its TDLR filing.

How much does iCode cost and how big is it?

iCode has an estimated construction value of $150K and approximately 2,535 square feet (about $59/sqft), based on its TDLR filing.

📋Scope of Work

Interior tenant fit out 2,535 sq ft

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.