Funding type
This project is privately funded, on private land for private use.
KILWINS in Fort Worth, TX
140 E EXCHANGE AVENUE SUITE 116, Fort Worth, TX, 76164
KILWINS is a renovation/alteration project at 140 E EXCHANGE AVENUE SUITE 116, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Nov 2026 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $450K across about 1,353 sq ft.
- Estimated project value
- $450K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 1,353 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $333/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 2 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
4 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordReview complete · TDLR filing
The filing records completion of the accessibility review.
8 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
62 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
61 days after the preceding date shown.
Source: TDLR filing
View source record
📰About KILWINS
Stockyards Station Renovation Details
The TDLR-registered accessibility project at Stockyards Station involves an interior build-out for a new Kilwins shop at 140 E Exchange Avenue Suite 116 in Fort Worth. This 1,353 sq ft renovation in Tarrant County carries an estimated cost of $450,000, resulting in a cost per square foot of $333. The work includes new interior walls, lighting, finishes, equipment, and furniture for the existing tenant space.
Fort Worth Heritage SYS LLC is the owner of record, while Novae Architecture serves as the design firm. Marc S Frame is the registered accessibility specialist for the project. The filing indicates that the plan review was completed in July 2026, with construction scheduled to finish in November 2026. Work is set to begin in September 2026.
When compared to 16,108 TDLR-registered renovation and alteration filings in Tarrant County, this project's estimated cost is above the county median of $250,000. The scheduled build window of 61 days is shorter than the county median of 92 days. The cost per square foot of $333 is also above the county median of $79. Novae Architecture has one other TDLR-registered project totaling $430,000 for a Kilwins location in Houston.
The project is privately funded on private land for private use. City of Fort Worth permit records show five permits on file at this street address, issued between November 2025 and October 2026. These include two Commercial Building Permits, two Design Reviews, and one Plumbing Backflow permit, with total declared valuations of $1,462,632.
Third-party sources describe Stockyards Station as a shopping and dining destination in the Fort Worth Stockyards area. A post by the City of Garland is not relevant here, but local coverage on fortworthstockyards.com and fortworthstockyards.org lists the station as a hub for events and retail.
Review Complete
Design review complete, construction may proceed
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 76164 (Fort Worth)
One email per change. Unsubscribe in one click. Privacy.
KILWINS is a Renovation/Alteration project located at 140 E EXCHANGE AVENUE SUITE 116, Fort Worth, TX 76164 in Fort Worth, Texas. The project has an estimated value of $450K covering 1,353 sq ft. FORT WORTH HERITAGE SYS LLC is the property owner and NOVAE ARCHITECTURE is the design firm of record. The project was registered with TDLR on June 23, 2026.
Frequently Asked Questions
Is the Kilwins store at Stockyards Station open?
The TDLR record covers construction only and does not record whether the business has started serving customers. The project is scheduled to finish in November 2026.
Who is the design firm for this project?
Novae Architecture is the registered design firm for the Kilwins interior build-out at 140 E Exchange Avenue in Fort Worth.
What is the total estimated cost?
The estimated cost for the renovation is $450,000, covering 1,353 sq ft of interior space.
When does construction start?
Construction is scheduled to start in September 2026, following the completion of plan review in July 2026.
What work is included in the scope?
The scope includes an interior build-out with new interior walls, lighting, finishes, equipment, and furniture for the new Kilwins location.
What is KILWINS?
KILWINS is a renovation/alteration project at 140 E EXCHANGE AVENUE SUITE 116 in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: INTERIOR BUILD-OUT OF EXISTING TENANT SPACE FOR NEW KILWIN'S - NEW INTERIOR WALLS, LIGHTING, FINISHES, EQUIPMENT, & FURNITURE
Is KILWINS open in Fort Worth?
KILWINS was scheduled to finish construction in Nov 2026 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.
Where is KILWINS located?
KILWINS is located at 140 E EXCHANGE AVENUE SUITE 116, Fort Worth, TX, 76164, in Tarrant County.
Who is the owner or developer of KILWINS?
FORT WORTH HERITAGE SYS LLC is the property owner/developer of record for KILWINS, per its TDLR project registration.
Who is the architect or design firm for KILWINS?
NOVAE ARCHITECTURE is the design firm of record for KILWINS, according to its TDLR filing.
How much does KILWINS cost and how big is it?
KILWINS has an estimated construction value of $450K and approximately 1,353 square feet (about $333/sqft), based on its TDLR filing.
Scope of Work
INTERIOR BUILD-OUT OF EXISTING TENANT SPACE FOR NEW KILWIN'S - NEW INTERIOR WALLS, LIGHTING, FINISHES, EQUIPMENT, & FURNITURE
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
140 E EXCHANGE AVENUE SUITE 116, Fort Worth, TX, 76164
Related Projects
Same Design Firm
$880K totalNearby Projects
Within 0.6 miRelated City Permits
Building permits found at or near this location
Change of Use for a conversion of existing tenant space. Demolition of any non structural walls, finishes, and equipment. New work to include full/partial height walls, new windows/doors, finishes, equipment, lighting.
The facility has a modified bitumen roof that is over 20+ years old. We intend to install a new TPO roof over the existing roof system. We plan to install a cover board prior to install of the TPO roof. Attached application includes photos of the existing roof and product data for the new TPO roof.
Re-Roof Low Roof Sections ONLY a. Clean and prepare existing Mod-Bit roofing system for new TPO membrane overlay. Remove compromised, saturated, and damaged system components. b. Provide and install 1 layer of Versico 1/2” 4x4’ SecurShield HD board, fully adhered to existing Mod-Bit system with Flexible Dash low-rise VOC-free adhesive. c. Provide and install 60 mil Versico TPO roofing membrane fully adhered to SecurShield HD board with Cav-Grip 3v Low-VOC TPO adhesive/primer. TPO will be standard color white, tan, or gray with matching accessories. d. Provide and install 60 Mill TPO fully adhered up walls with manufacturers approved adhesive. e. Remove and replace penetration pockets and flashing around all penetration pipes and vents. f. Remove and replace existing pitch pans at condenser units. g. Provide and install all termination points to comply with TPC-1.1, TPC-9.2, and TPC-12.1 manufactures specifications. Where clearance for TPC-9.2 detail is not sufficient, LiquiSeal will be utilized in accordance with manufacturer’s instructions. h. Provide and install TPO walkway pads around roof top units. i. Provide and install TPO equipment pads as needed around exhaust fans and other rooftop equipment. j. Remove and replace 24ga pre-finished gutters and downspouts at North and South walls. k. Remove and replace 2pc counter flashing at parapet wall where existing EPDM is flashed in. l. Detach, reflash, and reset roof grates as needed at the Roof Drains. m. Provide and install new 3’x3’ Bilco Roof Hatch, Safety Rail, and Post Up
3. Re-Roof Low Roof Sections ONLY a. Clean and prepare existing Mod-Bit roofing system for new TPO membrane overlay. Remove compromised, saturated, and damaged system components. b. Provide and install 1 layer of Versico 1/2” 4x4’ SecurShield HD board, fully adhered to existing Mod-Bit system with Flexible Dash low-rise VOC-free adhesive. c. Provide and install 60 mil Versico TPO roofing membrane fully adhered to SecurShield HD board with Cav-Grip 3v Low-VOC TPO adhesive/primer. TPO will be standard color white, tan, or gray with matching accessories. d. Provide and install 60 Mill TPO fully adhered up walls with manufacturers approved adhesive. e. Remove and replace penetration pockets and flashing around all penetration pipes and vents. f. Remove and replace existing pitch pans at condenser units. g. Provide and install all termination points to comply with TPC-1.1, TPC-9.2, and TPC-12.1 manufactures specifications. Where clearance for TPC-9.2 detail is not sufficient, LiquiSeal will be utilized in accordance with manufacturer’s instructions. h. Provide and install TPO walkway pads around roof top units. i. Provide and install TPO equipment pads as needed around exhaust fans and other rooftop equipment. j. Remove and replace 24ga pre-finished gutters and downspouts at North and South walls. k. Remove and replace 2pc counter flashing at parapet wall where existing EPDM is flashed in. l. Detach, reflash, and reset roof grates as needed at the Roof Drains. m. Provide and install new 3’x3’ Bilco Roof Hatch, Safety Rail, and Post Up
Watch all construction in 76164 (Fort Worth)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Fort Worth?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.