Funding type
This project is privately funded, on private land for private use.
Cedar Park Industrial
Little Elm Trail, Cedar Park, TX, 78613
Cedar Park Industrial is a new construction project at Little Elm Trail, Cedar Park, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Nov 2027. The project has an estimated value of $12.0M across about 161,849 sq ft.
- Estimated project value
- $12.0M
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 161,849 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $74/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 1 year
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
59 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
365 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Cedar Park Industrial
A 161,849 sq ft light shell industrial building is under new construction on Little Elm Trail in Cedar Park. The project, designated as Building 1 within the Cedar Park Industrial development, is privately funded on private land for private use. The estimated cost of the build is $12,000,000, which calculates to $74 per square foot.
The owner of record is Scannell Properties #817, LLC. Azimuth Architecture, Inc. serves as the design firm for this specific filing. Mary Rae Davies is the registered accessibility specialist associated with the project.
The project was registered with TDLR in September 2026. Construction is scheduled to begin in November 2026. The completion date listed on the filing is November 2027, so the build is targeted for November 2027. The current TDLR status is Project Registered, indicating that plan review is pending.
Context and Comparisons
Among 4,633 new construction filings in Williamson County, this project’s estimated cost of $12,000,000 is above the county median of $850,000. It falls within the top quarter of costs for its type. The scheduled build window of 365 days is longer than the county median of 245 days. However, the cost per square foot of $74 is below the county median of $110.
Azimuth Architecture, Inc. has six other TDLR-registered projects totaling $12,500,000. These include Shady Grove Building A in Grand Prairie, Lakeside Business District Building 4 in Rowlett, and Lakeview Business District Building 5 in Rowlett. The firm also worked on Parc 20 (North Building) in Arlington, which is closed, and Cascades at the Colony Building 10 in The Colony. These projects show a pattern of industrial and business district development across North Texas.
Local Area Profile
The ZIP code 78613, which covers the project area, has a population of about 89,162 according to U.S. Census ACS 2023 five-year estimates. The median household income is $120,829. There are 34,198 housing units, and the median owner-occupied home value is $461,900. Housing in this area is mostly owner-occupied. The Williamson County unemployment rate was 4.1 percent in July 2026, which is higher than a year earlier.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 78613 (Cedar Park)
One email per change. Unsubscribe in one click. Privacy.
Cedar Park Industrial is a New Construction project located at Little Elm Trail, Cedar Park, TX 78613 in Cedar Park, Texas. The project has an estimated value of $12.0M covering 161,849 sq ft. Scannell Properties #817, LLC is the property owner and Azimuth Architecture, Inc. is the design firm of record. The project was registered with TDLR on September 3, 2026.
Frequently Asked Questions
Is Cedar Park Industrial open for business?
The project is under construction. The TDLR record shows it is targeted for November 2027 completion. There is no information in the filing indicating that the facility is open or operating.
Who is the owner of Cedar Park Industrial?
The owner of record is Scannell Properties #817, LLC. The project is privately funded and located on private land for private use.
What is the size of the building?
The building is 161,849 square feet. It is described as a light shell building in the new construction filing.
When is construction expected to finish?
The completion date on the filing is November 2027. The project is targeted for November 2027, with construction starting in November 2026.
Who is the architect for this project?
Azimuth Architecture, Inc. is the design firm of record. They are also associated with five other TDLR-registered projects in North Texas.
What is Cedar Park Industrial?
Cedar Park Industrial is a new construction project at Little Elm Trail in Cedar Park, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction of light shell building. 161,849 sf.
Is Cedar Park Industrial open in Cedar Park?
Cedar Park Industrial is still under construction in Cedar Park, TX, with an estimated completion of Nov 2027 according to its TDLR registration.
Where is Cedar Park Industrial located?
Cedar Park Industrial is located at Little Elm Trail, Cedar Park, TX, 78613, in Williamson County.
Who is the owner or developer of Cedar Park Industrial?
Scannell Properties #817, LLC is the property owner/developer of record for Cedar Park Industrial, per its TDLR project registration.
Who is the architect or design firm for Cedar Park Industrial?
Azimuth Architecture, Inc. is the design firm of record for Cedar Park Industrial, according to its TDLR filing.
How much does Cedar Park Industrial cost and how big is it?
Cedar Park Industrial has an estimated construction value of $12.0M and approximately 161,849 square feet (about $74/sqft), based on its TDLR filing.
Scope of Work
New construction of light shell building. 161,849 sf.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
Little Elm Trail, Cedar Park, TX, 78613
Related Projects
Same Design Firm
$22.3M totalWatch all construction in 78613 (Cedar Park)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Cedar Park?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.