Funding type
This project is privately funded, on private land for private use.
Bent Branch Bldg 3 Spec Office
8001 Ridegepoint Drive Suite 100, Irving, TX, 75063
Bent Branch Bldg 3 Spec Office is a new construction project at 8001 Ridegepoint Drive Suite 100, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $500K across about 3,254 sq ft.
- Estimated project value
- $500K
About this figure
Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.
- Reported floor area
- 3,254 ft²
About this figure
Square footage reported for this scope of work. It may cover only part of a larger property.
- Estimated cost / ft²
- $154/sqft
About this figure
Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.
- Scheduled duration
- 2 months
About this figure
The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.
The project record
Project timeline
Explore filed milestones and scheduled dates. Open a milestone for its source.
3 timeline dates shown.
Project registered · TDLR filing
Registration of the project with the Texas Department of Licensing and Regulation.
Source: TDLR filing
View source recordScheduled construction start · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
24 days after the preceding date shown.
Source: TDLR filing
View source recordScheduled completion · Scheduled date
A date supplied in the filing; this does not confirm that work started or finished.
60 days after the preceding date shown.
Source: TDLR filing
View source record
📰About Bent Branch Bldg 3 Spec Office
Alliance Bent Branch Bldg 3 is a new construction project located at 8001 Ridegepoint Drive Suite 100 in Irving, Texas. The filing identifies the specific scope as the construction of a spec office inside an existing shell building. The total estimated cost for this development is $500,000, covering a floor area of 3,254 square feet.
The project is owned by CRP/AI West Bend Industrial Owner, L.P., with Seeberger Architecture serving as the design firm of record. Candice Ruth Fleming-adams is listed as the registered accessibility specialist.
This development is part of a broader redevelopment effort by the owner in the same location. Two other projects under the same ownership, Alliance Bent Branch Redevelopment Building 1 and Building 2, are also registered in Irving with a combined estimated value of $1,005,000. Seeberger Architecture has additional TDLR-registered projects across Texas, including large-scale industrial and office developments in Houston, Austin, and Katy.
In terms of scale, this project is smaller than the typical new construction filing in Dallas County. The estimated cost of $500,000 is below the county median of $950,000 for similar filings. The scheduled build window of 60 days is shorter than the county median of 243 days. However, the cost per square foot of $154 is above the county median of $125, reflecting the specific nature of the interior fit-out work within the existing shell.
The project was registered with TDLR in September 2026. Plan review is pending, and completion is targeted for December 2026. The TDLR status is listed as Project Registered. The short timeline suggests a focused interior construction phase rather than a full structural build from the ground up.
Project Context
The site is in ZIP code 75063, where the U.S. Census estimates a population of about 45,486. The median household income in this area is $117,583, and the median owner-occupied home value is $509,500. Housing in this ZIP code is mostly renter-occupied. The Dallas County unemployment rate was 3.3 percent in July 2026, higher than a year earlier.
Project Registered
Project has been registered with TDLR and is in pre-construction phase
Follow this project
Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.
Or watch all projects in 75063 (Irving)
One email per change. Unsubscribe in one click. Privacy.
Bent Branch Bldg 3 Spec Office is a New Construction project located at 8001 Ridegepoint Drive Suite 100, Irving, TX 75063 in Irving, Texas. The project has an estimated value of $500K covering 3,254 sq ft. CRP/AI West Bend Industrial Owner, L.P. is the property owner and Seeberger Architecture is the design firm of record. The project was registered with TDLR on September 25, 2026.
Frequently Asked Questions
Is Alliance Bent Branch Bldg 3 open for business?
The TDLR record indicates the project is under construction with a completion target of December 2026. It is not listed as open or operating in the filing data.
Who is the owner of this project?
The owner of record is CRP/AI West Bend Industrial Owner, L.P. This entity is also the owner of two other redevelopment buildings at the same Irving location.
What is the total cost of the project?
The estimated cost for the new construction is $500,000. This figure covers the construction of the spec office inside the existing shell building.
When is the project expected to be finished?
The filing states the project is targeted for December 2026. Construction is scheduled to start in October 2026, following registration in September 2026.
Who is the design firm?
Seeberger Architecture is the design firm of record. They have several other TDLR-registered projects in Texas, including locations in Houston and Austin.
What is Bent Branch Bldg 3 Spec Office?
Bent Branch Bldg 3 Spec Office is a new construction project at 8001 Ridegepoint Drive Suite 100 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Spec office to be built inside an existing shell building
Is Bent Branch Bldg 3 Spec Office open in Irving?
Bent Branch Bldg 3 Spec Office is still under construction in Irving, TX, with an estimated completion of Dec 2026 according to its TDLR registration.
Where is Bent Branch Bldg 3 Spec Office located?
Bent Branch Bldg 3 Spec Office is located at 8001 Ridegepoint Drive Suite 100, Irving, TX, 75063, in Dallas County.
Who is the owner or developer of Bent Branch Bldg 3 Spec Office?
CRP/AI West Bend Industrial Owner, L.P. is the property owner/developer of record for Bent Branch Bldg 3 Spec Office, per its TDLR project registration.
Who is the architect or design firm for Bent Branch Bldg 3 Spec Office?
Seeberger Architecture is the design firm of record for Bent Branch Bldg 3 Spec Office, according to its TDLR filing.
How much does Bent Branch Bldg 3 Spec Office cost and how big is it?
Bent Branch Bldg 3 Spec Office has an estimated construction value of $500K and approximately 3,254 square feet (about $154/sqft), based on its TDLR filing.
Scope of Work
Spec office to be built inside an existing shell building
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Location & views
8001 Ridegepoint Drive Suite 100, Irving, TX, 75063
Related Projects
Same Owner
$1.5M totalSame Design Firm
$41.9M totalNearby Projects
Within 1 kmWatch all construction in 75063 (Irving)
A short email when anything new is filed in this ZIP. One ZIP free, weekly.
Unsubscribe in one click. Privacy.
Keep exploring
What else is changing in Irving?
See the surrounding filings, compare the reported schedules, and follow the places that matter to you.