Oakdale Industrial III in Grand Prairie, TX

Oakdale Industrial III is a registered Texas accessibility project located at 355 East Oakdale Road in Grand Prairie, Dallas County. The filing identifies the specific work as Building B NW Corner Spec Office, a tenant improvement within an existing shell structure. The scope covers 3,382 sq ft of office space. CHIPT Dallas Oakdale III, LP. holds the owner and developer position for this private commercial undertaking. Azimuth Architecture serves as the design firm of record, while Mary Rae Davies is the registered accessibility specialist overseeing compliance.

Project Scale and Cost

The estimated cost for this renovation and alteration is $650,000. This results in a computed cost per square foot of $192. When compared to 32,783 TDLR-registered renovation or alteration filings in Dallas County, this project sits in the top quarter for cost. The median estimated cost for similar projects in the county is $250,000, with the middle half ranging from $122,000 to $600,000. The median size for these projects is 4,226 sq ft, making this 3,382 sq ft office slightly smaller than the typical Dallas County renovation. The median cost per square foot for the county is $73, placing this project well above that benchmark.

Timeline and Status

CHIPT Dallas Oakdale III, LP. has one other TDLR-registered project, Building A NW Corner Spec Office in Grand Prairie, which also carries an estimated cost of $650,000. Azimuth Architecture has six other TDLR-registered projects totaling $6,300,000, including work in Grand Prairie, Dallas, and Frisco. The Oakdale Industrial III project was registered with TDLR in November 2026. Plan review is pending and completion is targeted for March 2027. The scheduled build window is 120 days, which is longer than the county median of 92 days. Funding for this project is private, on private land for private use. The project status is listed as Project Registered.