Construction complete · Oct 2011🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

NIKON METROLOGY

8113 RIDGEPOINT DRIVE, #214, Irving, TX 75036, Irving, TX, 75036

NIKON METROLOGY is a renovation/alteration project at 8113 RIDGEPOINT DRIVE, #214, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2011). The project has an estimated value of $150K.

Completed100%

📊Project Metrics

TDLR #EABPRJB2800967

$150K

Project Value

—

Square Feet

—

Cost/SqFt

1 months

Duration

Registered:Sep 22, 2011

Start:Sep 1, 2011

Target:Oct 1, 2011

🏁

Project Closed

Project has been completed and closed

NIKON METROLOGY is a Renovation/Alteration project located at 8113 RIDGEPOINT DRIVE, #214, Irving, TX 75036 in Irving, Texas. The project has an estimated value of $150K. FSCP DALLAS PORTFOLIO HOLDINGS LP is the property owner and COLLETT DESIGN ASSOCIATES INC is the design firm of record. The project was registered with TDLR on September 22, 2011.

❓Frequently Asked Questions

What is NIKON METROLOGY?

NIKON METROLOGY is a renovation/alteration project at 8113 RIDGEPOINT DRIVE, #214 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Drywall, flooring, ceiling grid, electrical misc. general build-out.

Is NIKON METROLOGY open in Irving?

Construction on NIKON METROLOGY is complete — TDLR records show the project passed its required accessibility inspection in Oct 2011. The building is finished and very likely open.

Where is NIKON METROLOGY located?

NIKON METROLOGY is located at 8113 RIDGEPOINT DRIVE, #214, Irving, TX, 75036, in Dallas County.

Who is the owner or developer of NIKON METROLOGY?

FSCP DALLAS PORTFOLIO HOLDINGS LP is the property owner/developer of record for NIKON METROLOGY, per its TDLR project registration.

Who is the architect or design firm for NIKON METROLOGY?

COLLETT DESIGN ASSOCIATES INC is the design firm of record for NIKON METROLOGY, according to its TDLR filing.

How much does NIKON METROLOGY cost and how big is it?

NIKON METROLOGY has an estimated construction value of $150K, based on its TDLR filing.

📋Scope of Work

Drywall, flooring, ceiling grid, electrical misc. general build-out.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.