2.506A AND 2.506 LAB RENOVATION is a renovation/alteration project at 10100 Harry Ransom Trail, Austin, TX 78758, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2020). The project has an estimated value of $205K across about 694 sq ft.
Project has been completed and closed
2.506A AND 2.506 LAB RENOVATION is a Renovation/Alteration project located at 10100 Harry Ransom Trail, Austin, TX 78758 in Austin, Texas. The project has an estimated value of $205K covering 694 sq ft. The University of Texas is the property owner and WestEast Design Group is the design firm of record. The project was registered with TDLR on September 17, 2020.
2.506A AND 2.506 LAB RENOVATION is a renovation/alteration project at 10100 Harry Ransom Trail, Austin, TX 78758 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Removal of lab walls to expand the existing labs, and to create a new exit. Replacing existing fume hoods with a new ones. Providing new laser table and shelving, and laser curtain. Replacing existing lighting with 2 types of LED lights.
Construction on 2.506A AND 2.506 LAB RENOVATION is complete — TDLR records show the project passed its required accessibility inspection in Oct 2020. The building is finished and very likely open.
2.506A AND 2.506 LAB RENOVATION is located at 10100 Harry Ransom Trail, Austin, TX 78758, Austin, TX, 78758, in Travis County.
The University of Texas is the property owner/developer of record for 2.506A AND 2.506 LAB RENOVATION, per its TDLR project registration.
WestEast Design Group is the design firm of record for 2.506A AND 2.506 LAB RENOVATION, according to its TDLR filing.
2.506A AND 2.506 LAB RENOVATION has an estimated construction value of $205K and approximately 694 square feet (about $295/sqft), based on its TDLR filing.
Removal of lab walls to expand the existing labs, and to create a new exit. Replacing existing fume hoods with a new ones. Providing new laser table and shelving, and laser curtain. Replacing existing lighting with 2 types of LED lights.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Sep 17, 2020
Review Complete
Inspection Complete
Closed
Oct 30, 2020
Building permits found at or near this location
Install Inground Prefabricated Pool w/Spa ELECTRIC HEAT NO PP REQUIRED Concrete Decking Remove/Demo Existing Above Ground Pool and Wood Deck
Install Inground Prefabricated Pool w/Spa ELECTRIC HEAT NO PP REQUIRED Concrete Decking Remove/Demo Existing Above Ground Pool and Wood Deck
EV charger installation. install 60 AMP 240 Volt breaker in the main panel using an available slot. Route branch circuit directly behind the main panel and hard wire the GM power up 2 onto the interior side wall of the garage. The charger will be installed on a 60-amp circuit and will draw up to 48 amp continuous.
Request to disconnect Add 125 amp main to existing panel Per EC: they will not be upgrading anything as the existing service can handle the addition of the 125 amp
Install new 9.20 kW DC rooftop solar system to existing residential
